https://community.hpe.com/t5/operating-system-hp-ux/cluster/m-p/3931436#M287385 How will you configure MC/SG 2 node cluster? Tue, 23 Jan 2007 13:10:21 GMT Indrajit Bhagat 2007-01-23T13:10:21Z https://community.hpe.com/t5/operating-system-hp-ux/cluster/m-p/3931436#M287385 How will you configure MC/SG 2 node cluster? Tue, 23 Jan 2007 13:10:21 GMT https://community.hpe.com/t5/operating-system-hp-ux/cluster/m-p/3931436#M287385 Indrajit Bhagat 2007-01-23T13:10:21Z https://community.hpe.com/t5/operating-system-hp-ux/cluster/m-p/3931437#M287386 In keeping with the quality of your question, I will answer "carefully". You have lots of homework to do before you ever begin to actually setup the cluster. So start reading all the MC/SG documentation. That part is actually quite easy and takes only a few minutes once you've done it a few times. The part that is hard is identifying all the single points of failure (disks, network cards, cables, switches, power supplies, HVAC Unit, AC Power [which means you should have a generator in addion to to UPS's] ... ) and dealing with each of those.<BR /><BR />Only when that step is taken care of, should you even think about installing MC/SG. I know you are going to ignore this but I've actually given you the best possible answer. <BR /> Tue, 23 Jan 2007 13:23:35 GMT https://community.hpe.com/t5/operating-system-hp-ux/cluster/m-p/3931437#M287386 A. Clay Stephenson 2007-01-23T13:23:35Z