topic Re: Error: Unable to get a socket for server1 in Operating System - HP-UX

Error: Unable to get a socket for server1

Manuales — Sun, 28 Jan 2007 20:58:25 GMT

I'd like to know why appear the error about socket ... i mean, how can i know what is the socket ? and how can i start it?

server1:/etc/cmcluster->cmcheckconf -C sap.ascii

Begin cluster verification...
Error: Fail to bind with socket due to errno 227
Error: Unable to get a socket for server1: Can't assign requested address
Error: Unable to connect to the configuration daemon (cmclconfd) on node server1: Connection timed out
cmcheckconf : Unable to obtain configuration information: No such device or address.

Re: Error: Unable to get a socket for server1

Peter Godron — Mon, 29 Jan 2007 05:20:53 GMT

Hi,
what are the results of:
cmquerycl ?
Has anything been changed on the set-up?

Re: Error: Unable to get a socket for server1

Wouter Jagers — Mon, 29 Jan 2007 05:33:29 GMT

In several other threads, you & your colleagues are facing some other issues.

We've seen questions like 'What is a cluster', 'What is a configuration file' and some more.

I think it would be helpful if you could tell us about your environment a little:

- Are you working on an existing (running/not-running) cluster ?
- Are you currently setting up some clustered systems ?
- Are you working on existing, non-clustered systems ?

Some answers to these questions will help us help you better ;-)

Cheers

Re: Error: Unable to get a socket for server1

Jaime Bolanos Rojas. — Mon, 29 Jan 2007 08:20:58 GMT

Manuales,

Make sure that the IP addresses in the /etc/hosts file are pointing to the correct locations.

Suerte con el cluster,

Jaime.