Icap error

David_711 — Tue, 30 Jan 2007 18:51:20 GMT

Hi,
I have a rp7405 server with two virtual partitions and hpux 11.23.
On the two virtual partitions i have a problem with icap, because every time that i try to add a cpu with vparmodify -p vpar -a cpu::6 or -m the following messages is present:
ERROR: The following low-level error occurred: connection timed out
vparmodify: Error: iCAP failed to authorize addition of 2 cpu(s)

I try with the upgrade of the icap, nprovider and wbem, but the same problem is present.

When i check the filesets of my icap product i can see that iCOD.ICOD-RUN,l=/,r=B.11.23.08.01.01.11" is with error and the state is installed but not configured. I try to configure this manually with swconfig \*, but a error is present. Again....i try to re-install the product but same fileset is with error. This is the file:

======= 01/30/07 16:49:52 SAT BEGIN verify AGENT SESSION (pid=8884)
(jobid=hp00pb0c-0182)

* Agent session started for user "root@hp00pb0c". (pid=8884)

* Beginning Analysis Phase.
* Target: hp00pb0c:/
* Target logfile: hp00pb0c:/var/adm/sw/swagent.log
* Reading source for file information.
* Configured openssl.OPENSSL-SRC,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-RUN,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-PVT,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-PRNG,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-MIS,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-MAN,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-LIB,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-INC,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-DOC,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-CONF,l=/opt/openssl,r=A.00.09.07e.021
* Configured openssl.OPENSSL-CER,l=/opt/openssl,r=A.00.09.07e.021
* Configured WBEMServices.WBEM-CORE,l=/,r=A.02.00.11
* Configured WBEMServices.WBEM-CORE-COM,l=/,r=A.02.00.11
* Configured WBEMServices.WBEM-MAN,l=/,r=A.02.00.11
* Configured WBEMServices.WBEM-MX,l=/,r=A.02.00.11
* Configured NParProvider.NPAR-RUN,l=/,r=B.23.01.06.02
* Configured PHCO_34721.UX-CORE,l=/,r=1.0
* Configured iCOD.ICOD-COMMON,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-ENG-A-MAN,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-FCA-I-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-FCA-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-FRE-I-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-FRE-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-GER-I-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-GER-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-HKG-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-ITA-I-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-ITA-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-JPN-E-MAN,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-JPN-E-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-JPN-S-MAN,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-JPN-S-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-JPN-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-KOR-E-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-KOR-U-MSG,l=/,r=B.11.23.08.01.01.11
* Installed iCOD.ICOD-RUN,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-SCH-H-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-SCH-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-SPA-I-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-SPA-U-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-TCH-B-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-TCH-E-MSG,l=/,r=B.11.23.08.01.01.11
* Configured iCOD.ICOD-TCH-U-MSG,l=/,r=B.11.23.08.01.01.11
* The software "iCOD.ICOD-RUN,l=/,r=B.11.23.08.01.01.11" is not
in the correct state (AVAILABLE, INSTALLED, or CONFIGURED).
You will need to recopy, reinstall or configure this software
before operating on software that depends on it.
The corequisite "iCOD.ICOD-RUN,l=/,r=B.11.23.08.01.01.11" for
fileset "iCOD.ICOD-COMMON,l=/,r=B.11.23.08.01.01.11" cannot be
successfully resolved.
ERROR: The dependencies for fileset
"iCOD.ICOD-COMMON,l=/,r=B.11.23.08.01.01.11" cannot be
resolved (see previous lines).
ERROR: Fileset "iCOD.ICOD-RUN,l=/,r=B.11.23.08.01.01.11" had file
errors.

* Summary of Analysis Phase:
Verified B9073BA,l=/,r=B.11.23.08.01.01.11
+ Verified openssl.OPENSSL-SRC,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-RUN,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-PVT,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-PRNG,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-MIS,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-MAN,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-LIB,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-INC,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-DOC,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-CONF,l=/opt/openssl,r=A.00.09.07e.021
+ Verified openssl.OPENSSL-CER,l=/opt/openssl,r=A.00.09.07e.021
+ Verified WBEMServices.WBEM-CORE,l=/,r=A.02.00.11
+ Verified WBEMServices.WBEM-CORE-COM,l=/,r=A.02.00.11
+ Verified WBEMServices.WBEM-MAN,l=/,r=A.02.00.11
+ Verified WBEMServices.WBEM-MX,l=/,r=A.02.00.11
+ Verified NParProvider.NPAR-RUN,l=/,r=B.23.01.06.02
+ Verified PHCO_34721.UX-CORE,l=/,r=1.0
ERROR: Verify failed iCOD.ICOD-COMMON,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-ENG-A-MAN,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-FCA-I-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-FCA-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-FRE-I-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-FRE-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-GER-I-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-GER-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-HKG-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-ITA-I-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-ITA-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-JPN-E-MAN,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-JPN-E-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-JPN-S-MAN,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-JPN-S-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-JPN-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-KOR-E-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-KOR-U-MSG,l=/,r=B.11.23.08.01.01.11
ERROR: Verify failed iCOD.ICOD-RUN,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-SCH-H-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-SCH-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-SPA-I-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-SPA-U-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-TCH-B-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-TCH-E-MSG,l=/,r=B.11.23.08.01.01.11
Verified iCOD.ICOD-TCH-U-MSG,l=/,r=B.11.23.08.01.01.11
ERROR: 2 of 43 filesets had Errors.
* 41 of 43 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.
Please help.
Thanks,
David

topic Icap error in Operating System - HP-UX

Icap error