topic Re: command in Operating System - HP-UX

command

Indrajit Bhagat — Sat, 03 Feb 2007 03:51:01 GMT

what task are carried out using SD-UX command.

Re: command

Mridul Shrivastava — Sat, 03 Feb 2007 04:01:49 GMT

SD-UX is used to install, configure, verify and remove the software, drivers, patches and applications..

Re: command

Raj D. — Sat, 03 Feb 2007 05:21:34 GMT

Indrajit,

Software Distributor for HP-UX (SD-UX) provides you with a powerful set of tools for centralized HP-UX software management. When connected by a LAN or WAN, each computer running SD-UX can act as a server, allowing its resources to be managed or accessed by other machines, or as a client, managing or using the resources of other machines.

Software Distributor commands are included with the HP-UX operating system and, by default, manage software on a local host only. You can also enable remote operations, which let you install and manage software simultaneously on multiple remote hosts connected to a central controller.

Here is few sd-ux command :
swinstall, swremove, swlist , swcopy , swverify. You can check the manpage for details.

Cheers,
Raj.

Re: command

Raj D. — Sat, 03 Feb 2007 05:24:31 GMT

Also have a look on the below page,

http://docs.hp.com/en/B2355-90754/B2355-90754.pdf

hth,
Raj.

Re: command

Raj D. — Sat, 03 Feb 2007 07:23:15 GMT

Indrajit,

Also check this link:
http://66.34.90.71/ITRCForumsEtiquette/after.html

Enjoy,
cheers,
Raj

Re: command

Indrajit Bhagat — Sun, 04 Feb 2007 00:14:35 GMT

thanks to all of youu