topic Re: Need configration detail in Operating System - HP-UX

Need configration detail

Eric Jacklin — Fri, 16 Feb 2007 09:11:50 GMT

Hi

I want to know what is the current configration Like HDD,Memory,HBA,FC etc

Is there any utility or command will help me out to pull this from my server ?

Re: Need configration detail

Patrick Wallek — Fri, 16 Feb 2007 09:16:30 GMT

If you have Ignite/UX installed, run the print_manifest command.

Other popular tools: cfg2html, nickel,

Re: Need configration detail

Wouter Jagers — Fri, 16 Feb 2007 09:24:23 GMT

If not, some info can be also retrieved from SAM.

As I recall, the "system properties" section is in the "performance" section somewhere.

Cheers

Re: Need configration detail

Peter Godron — Fri, 16 Feb 2007 09:25:10 GMT

Hi Jitendra,
please see this earlier thread:
"Hardware information"
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1099822

You can also use cstm and SAM.

Please also read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33 on how to reward any useful answers given to your questions.

Your profile shows you have only awarded points to 1 of 14 answers !

Re: Need configration detail

Bryan Burton — Fri, 16 Feb 2007 09:29:12 GMT

just open sam and look under HDD, Memory etc.

Re: Need configration detail

DCE — Fri, 16 Feb 2007 09:35:38 GMT

Download sysinfo from the attached link - it will give you the info you want - and more. I use it to collect info for DR purposes. The site below has a lot of other utilities as well

http://gatekeep.cs.utah.edu/hppd/cgi-bin/search?package=on&description=on&term=sysinfo

Re: Need configration detail

Rick Garland — Fri, 16 Feb 2007 10:52:47 GMT

The readily available utilities of "cfg2html" and "sysinfo" are good. Each will provide just about al the information about your system - serial numbers, ioscan, LVM, networking, SAN, etc.

Save these outputs as you will be able to look back in time to see how your system has changed, for better or worse. Run them on a regular interval, once a week for example.

Re: Need configration detail

vz7r1x — Fri, 16 Feb 2007 14:08:51 GMT

If you look into "/var/opt/ignite/recovery/latest/manifest" file, you will see all the info you are looking for.
e.g:
Serial number,Partition,System Hardware,Model
main Memory,Processors,Storage devices,I/O Interfaces,Disk layout,File System layout,
Swap configuration,Kernel Configuration etc.

Thanks

Re: Need configration detail

Peter Godron — Tue, 20 Feb 2007 04:05:58 GMT

Jitendra,
lots of useful answers have been provided.

Could you please complete the thread by awarding points to helpful answers and summarising the solution for you.

Please read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33 on how to reward any useful answers given to your questions.