https://community.hpe.com/t5/operating-system-hp-ux/ethernet-status-disabled/m-p/3948866#M289879 Hi,<BR /><BR />sounds like a defect slot or wrong connection from mainboard to lan card.<BR />As soon as you've power and a working lan you should have connection lights.<BR /><BR />So either the lan card (working - tested in another ws?) is connected wrong or the slot is dead.<BR /><BR />Volkmar Wed, 21 Feb 2007 12:22:17 GMT V. Nyga 2007-02-21T12:22:17Z https://community.hpe.com/t5/operating-system-hp-ux/ethernet-status-disabled/m-p/3948865#M289878 I have a c180 workstation running HPUX 11.0.<BR />The workstation was recently moved to a new room and as far as i can see all the IP addresses for server, gateway and netmask are all correct, but still unable to get a connection.<BR />The lan card has been checked and replaced 3 times. The lan cable has been plugged into another workstation and the connection lights are good but not when you plug it back into the c180.<BR />On checking SAM the ethernet card has a status of disabled and will not enable.<BR />What am i missing. Could it be that the network is set up incorrectly on the server. Wed, 21 Feb 2007 11:56:15 GMT https://community.hpe.com/t5/operating-system-hp-ux/ethernet-status-disabled/m-p/3948865#M289878 Steven Force 2007-02-21T11:56:15Z https://community.hpe.com/t5/operating-system-hp-ux/ethernet-status-disabled/m-p/3948866#M289879 Hi,<BR /><BR />sounds like a defect slot or wrong connection from mainboard to lan card.<BR />As soon as you've power and a working lan you should have connection lights.<BR /><BR />So either the lan card (working - tested in another ws?) is connected wrong or the slot is dead.<BR /><BR />Volkmar Wed, 21 Feb 2007 12:22:17 GMT https://community.hpe.com/t5/operating-system-hp-ux/ethernet-status-disabled/m-p/3948866#M289879 V. Nyga 2007-02-21T12:22:17Z