topic Re: HPUX 11.0 MSL500 Library in Operating System - HP-UX

HPUX 11.0 MSL500 Library

James Pashturro — Wed, 07 Mar 2007 13:23:47 GMT

I've attached an MSL500 (autoloader) to my fabric and now can see the two drives an robotic (they show up as claimed) but am having trouble getting my backup software to see them.

My assumption is that if they are showing upa s claimed there's no need to install drivers, etc. (I can't find any anywhere on the HP site.)

Have I missed something?

Re: HPUX 11.0 MSL500 Library

Court Campbell — Wed, 07 Mar 2007 13:30:53 GMT

what backup software are you using?

Re: HPUX 11.0 MSL500 Library

A. Clay Stephenson — Wed, 07 Mar 2007 13:36:43 GMT

That depends upon your backup software. As a next step, I would use the mc and mt commands to talk to your robotics and tape drives.

Re: HPUX 11.0 MSL500 Library

Fernando Jose P de Souz — Wed, 07 Mar 2007 15:37:19 GMT

Hi,

You need enable the driver in the kernel:

schgr

This driver is the media changer, when you enable this driver, you see in the backup software.