topic Re: rx6600 - cannot lanboot in Operating System - HP-UX

rx6600 - cannot lanboot

Eric Herr — Fri, 09 Mar 2007 14:30:29 GMT

Created an image of this rx6600 using make_net_recovery. Trying to dump this image back to the same rx6600 server to resize the root filesystem. I'm getting the following message trying to use "lanboot select" and selecting the ip address. This adapter works fine when the server is booted.

Client MAC Address: ...
PXE-E12: Could not detect network connection. Check cable.
Exit status code: Invalid Parameter

Re: rx6600 - cannot lanboot

Sameer_Nirmal — Fri, 09 Mar 2007 15:28:47 GMT

The error message indicates that the lan interface card selected by lanboot select is not UP and no network cable is connected.

Select the correct interface card which is on the same subnet as that of IG-UX server and it should work.

Re: rx6600 - cannot lanboot

Eric Herr — Fri, 09 Mar 2007 15:30:29 GMT

The problem was that I created the ignite image when logged into the iLO console.