topic Re: Ignite UX problem in Operating System - HP-UX

Ignite UX problem

Adam Noble — Wed, 04 Apr 2007 03:31:59 GMT

Hi,

I am looking to install an ignite image via the network to a PA_RISC server. I am from the Boot prompt typing bo lan. install. This is fine it recognises the Server and allocates one of the temporary addresses. It then prompts me as to which OS I wish to install and the only option I get is 11.11. I can see in my index file however there is a stanza for 11.00 and 11.23 and I want to understand why they are not visible.

Thanks

Re: Ignite UX problem

Steven E. Protter — Wed, 04 Apr 2007 03:53:59 GMT

Shalom,

Most likely they are not visible because of errors in the INDEX or other Ignite configuration files it refers to.

You may wish to check the logs on the Ignite server for specifics.

Its possible the Ignite software that permits boots for the OS in question is not installed on the server. It is available on any Core OS cd for the OS in question. Notice it is different than the Ignite software you download from http://software.hp.com

SEP

Re: Ignite UX problem

Adam Noble — Wed, 04 Apr 2007 05:00:02 GMT

I found the problem it was due to the original software installation. Only the installation software for 11.11 was at the latest revision.