topic Re: Modem configuration. in Operating System - HP-UX

Modem configuration.

Joell — Fri, 14 Jul 2000 08:01:01 GMT

Hi!

I have a Server D370 and I was configure a modem from SAM and I edit the file /etc/uucp/Devices using:

Direct ttyd1p0 - 2400 direct

but when I use the command cu I cant dial to remote server, How can I configure the modem??

Thnx

Re: Modem configuration.

Ruediger Noack — Fri, 14 Jul 2000 09:37:51 GMT

Hi Joell,

ususally the dialout device is culxxx - here cul1p0. ttydxxx is in default for dial in. Check with lssf /dev/ttyd1p0 (or better lssf /dev/*1p0) the configuration and use the right device for modem accecc
( e.g. cu -l cul1p0 ). Now configure with AT command set your modem (see modem manual).
And : 2400 ! Is your modem one or two days older ?

Ruediger

Re: Modem configuration.

Andreas Voss — Fri, 14 Jul 2000 09:39:49 GMT

Hi,

you have to use a different device file in /usr/lib/uucp/Devices:
Direct cul1p0 - 2400 direct

Then you can connect with:
cu -l cul1p0

Cheers

Andrew