topic Shutdown - bus error in Operating System - HP-UX

Shutdown - bus error

Radim Jarosek — Fri, 14 Jul 2000 11:25:37 GMT

Hi all,

I have problem with "subject".
When I write "shutdown -ry now" I receive : bus error (coredump).

I've installed PHCO_21574.
System - HP 10.20 A 9000/785.

Thanks

Radim

Re: Shutdown - bus error

Andy Monks — Fri, 14 Jul 2000 11:29:07 GMT

Try doing a /sbin/shutdown -ry now

Also, what the output from 'what /sbin/shutdown /usr/sbin/shutdown'

Re: Shutdown - bus error

Radim Jarosek — Fri, 14 Jul 2000 11:43:29 GMT

Hi Andy,

1. /sbin/shutdown is the same.
2. output from "what /sbin ..."
/sbin/shutdown:
$Revision: 76.3.1.1 $
PATCH/10_10 PHCO_16722 $Revision: 76.162.1.14.1.76 $
PATCH_10_10: shutdown.o localDisk.o 00/04/23
/usr/sbin/shutdown:
$Revision: 76.3.1.1 $
PATCH/10_10 PHCO_16722 $Revision: 76.162.1.14.1.76 $
PATCH_10_10: shutdown.o localDisk.o 00/04/23

-------------

Radim

Re: Shutdown - bus error

Andy Monks — Fri, 14 Jul 2000 11:56:45 GMT

Hmmm, well the 'what' output matches the patch text. Which says it's for 10.10/10.20. You could try the old version of the command which should be located somewhere under /var/adm/sw/patches/PHCO_21574

If it's not search under /var/adm/sw/patches

The 'strange' thing is that the base patch has a higher revision than the current one. Maybe the patch is actually just for 10.10.

I'm attaching a 'base' shutdown from 10.20 just in case you can't find yours. It's the /sbin/shutdown command (so no libraries required)

Re: Shutdown - bus error

CHRIS_ANORUO — Fri, 14 Jul 2000 12:16:22 GMT

Radim,

SWREMOVE THE PATCH, AND RETRY THE SHUTDOWN COMMAND AGAIN.

Re: Shutdown - bus error

Radim Jarosek — Sat, 15 Jul 2000 06:51:11 GMT

Hi all,

I have removed patch and now is work correctly. But how is possible that it is not
work ? I thought that patches is good way to optimalizing system. But I can see ... :-)

many thanks

Radim