https://community.hpe.com/t5/operating-system-hp-ux/maxdsiz-64-bit-value/m-p/3988287#M295279 The value on "setting" is the value that has the kernel parameter, in this case for the maxdsiz_64bit, the "usage", is the amount of mem that is consumed by the parameter, and the percentage, well, that is just for statistics and means the usage percentage.<BR /><BR />#kcusage -l nkthread<BR />Parameter: nkthread<BR />Usage: 361<BR />Setting: 8416<BR />Percentage: 4.3<BR /><BR />I hope this helps,<BR /><BR />Regards Wed, 25 Apr 2007 07:31:00 GMT Marco A. 2007-04-25T07:31:00Z https://community.hpe.com/t5/operating-system-hp-ux/maxdsiz-64-bit-value/m-p/3988286#M295278 Hi guys,<BR />I have the follwng confign,<BR />rx4640,8gb ram,11i v2 ..<BR /><BR />#kcusage -l<BR /><BR />Tunable: maxdsiz_64bit<BR />Usage: 3829760<BR />Setting: -2147483648<BR />Percentage: -4627778745489424384<BR /><BR />this -ve value (setting)is the max value right..?i have oracle 64 bit running and 10 databases running.<BR /> Wed, 25 Apr 2007 02:25:09 GMT https://community.hpe.com/t5/operating-system-hp-ux/maxdsiz-64-bit-value/m-p/3988286#M295278 boomer_2 2007-04-25T02:25:09Z https://community.hpe.com/t5/operating-system-hp-ux/maxdsiz-64-bit-value/m-p/3988287#M295279 The value on "setting" is the value that has the kernel parameter, in this case for the maxdsiz_64bit, the "usage", is the amount of mem that is consumed by the parameter, and the percentage, well, that is just for statistics and means the usage percentage.<BR /><BR />#kcusage -l nkthread<BR />Parameter: nkthread<BR />Usage: 361<BR />Setting: 8416<BR />Percentage: 4.3<BR /><BR />I hope this helps,<BR /><BR />Regards Wed, 25 Apr 2007 07:31:00 GMT https://community.hpe.com/t5/operating-system-hp-ux/maxdsiz-64-bit-value/m-p/3988287#M295279 Marco A. 2007-04-25T07:31:00Z