https://community.hpe.com/t5/operating-system-hp-ux/cluster-re-config-when-removing-network-interface/m-p/3990129#M295595 Shalom,<BR /><BR />No, cmhaltnode should be sufficient to take a node out of the cluster and fail all its packages to other nodes.<BR /><BR />Any packages that do not fail over shows deficiencies in cluster design and testing.<BR /><BR />Since the new NIC card will probably be detected as the same lan# as the old, reconfiguration will probably be not needed after the work.<BR /><BR />SEP Fri, 27 Apr 2007 08:29:21 GMT Steven E. Protter 2007-04-27T08:29:21Z https://community.hpe.com/t5/operating-system-hp-ux/cluster-re-config-when-removing-network-interface/m-p/3990128#M295594 I would assume that I do not need to halt the cluster when removing a broken interface card from the cluster configuration ?<BR /><BR />Thanks,<BR />Matthias Fri, 27 Apr 2007 08:12:04 GMT https://community.hpe.com/t5/operating-system-hp-ux/cluster-re-config-when-removing-network-interface/m-p/3990128#M295594 Matthias Oswald 2007-04-27T08:12:04Z https://community.hpe.com/t5/operating-system-hp-ux/cluster-re-config-when-removing-network-interface/m-p/3990129#M295595 Shalom,<BR /><BR />No, cmhaltnode should be sufficient to take a node out of the cluster and fail all its packages to other nodes.<BR /><BR />Any packages that do not fail over shows deficiencies in cluster design and testing.<BR /><BR />Since the new NIC card will probably be detected as the same lan# as the old, reconfiguration will probably be not needed after the work.<BR /><BR />SEP Fri, 27 Apr 2007 08:29:21 GMT https://community.hpe.com/t5/operating-system-hp-ux/cluster-re-config-when-removing-network-interface/m-p/3990129#M295595 Steven E. Protter 2007-04-27T08:29:21Z