topic Re: sam error in Operating System - HP-UX

sam error

whiteSox — Fri, 04 May 2007 12:36:34 GMT

Hi I am getting this error when i start sam
"0B1H1G1A1C0D1I0L0A999Y999Csam: Couldn't bring up the initial window. This may occur when
you specify an incorrect display." How can i fix this i am working with 11.0 hp-ux .Thanks for your help ...

Re: sam error

Aussan — Fri, 04 May 2007 12:38:12 GMT

what is your term set to?

do echo $TERM

Re: sam error

OldSchool — Fri, 04 May 2007 12:42:26 GMT

are you running this via term / term emulator (no X-Windows)? If so, make sure the DISPLAY enviroment variable is not set - i.e. "unset DISPLAY"

if it is X, then "echo $DISPLAY" and see if it is set properly

Re: sam error

whiteSox — Fri, 04 May 2007 12:44:57 GMT

TERM is set to hp

Re: sam error

Torsten. — Fri, 04 May 2007 12:56:56 GMT

How about the DISPLAY variable?

echo $DISPLAY

Check, if this is correct.

Re: sam error

whiteSox — Fri, 04 May 2007 14:19:55 GMT

it does not comeback with any thing...

Re: sam error

whiteSox — Fri, 04 May 2007 14:21:12 GMT

echo $DISPLAY does not comeback with any out put ,...

Re: sam error

Aussan — Fri, 04 May 2007 14:23:14 GMT

do echo $LINES

Re: sam error

whiteSox — Fri, 04 May 2007 14:49:15 GMT

# echo $LINES
ksh: LINES: parameter not set

Re: sam error

Aussan — Fri, 04 May 2007 15:02:13 GMT

ksh??

on hp-ux the root shell should be sh, not ksh

Re: sam error

Noble Sebastian — Fri, 04 May 2007 15:14:20 GMT

hi
u try to hp server terminal