topic Re: Changing NIS domain name in Operating System - HP-UX

Changing NIS domain name

Huiqi Liu — Fri, 14 Jul 2000 14:04:37 GMT

We have just changed our NIS domain name on the fly - which itself wasn't particularly troublesome, except one small problem on machines running HP-UX 11. The problem is no new users can log in on these machines, ypcat passwd shows the correct entries in the passwd map, but when you do a "su - username" it says "unknown user". I do realise the quickest solution would be to do a reboot but I can't at the moment due to heavy workload. Machines running HP-UX 10x didn't require reboots.

Any suggestions? Thanks.

Re: Changing NIS domain name

Alan Riggs — Fri, 14 Jul 2000 14:38:55 GMT

What does domainname return for the server in question? Does it match your new change? I asssume you have edited the config files and recycled nis servers and client services on all boxes. Does ypwhich -m show that maps are being resolved to the proper place?

Re: Changing NIS domain name

Huiqi Liu — Fri, 14 Jul 2000 14:55:18 GMT

Thanks for the reply.

domainname on the machines shows the new, correct domain name. Yes I restarted all the yp services and ypwhich -m lists the correct maps. (The config files have been modified too, which I guess will only be read at the next reboot). "ypmatch newuser passwd" even returns the correct info. But su - newuser doesn't work (nor telneting and trying to log in as the new user). Like I said, a reboot will definitely fix it - but what is causing this problem? Very intriguing.

Re: Changing NIS domain name

Antoanetta Naghiu — Fri, 14 Jul 2000 16:00:05 GMT

Try to stop and restart nis client.
/sbin/init.d/nis.client stop and again start.
Eventually manually push the maps to slaves (if you use nis slave in your config).
Any better?

Re: Changing NIS domain name

Alan Riggs — Fri, 14 Jul 2000 17:13:00 GMT

That is a good point. Try repushing all mapes (just issue ypmake from the master). I don't know why that would be necessary, but see what happens.

One last thing -- check /etc/passwd on the server to make sure the last line correctly refers login checks to NIS.

Re: Changing NIS domain name

Huiqi Liu — Mon, 17 Jul 2000 07:34:22 GMT

Thanks for the replies.

Tried that (nis.client stop/start, yppush) and also made the machine to bind to the master using ypset. /etc/passwd file has correct entry and also played with nsswitch.conf file to no avail (currently has compat in passwd line).