topic Re: Perfview analyser in Operating System - HP-UX

Perfview analyser

Paul Thomson_2 — Thu, 24 May 2007 09:08:21 GMT

Hi

I know that this probably belongs in the openview area. But I have used the following thread to download perfview (http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1127551)

for 11.23 for Itanium after the version i currently have is
B5013AA C.03.10.00 HP PerfView Analyzer for s800 11i
B5015AA C.03.10.00 HP PerfView Monitor for s800 11i

However, the trial version advises I need to install it onto an 11.23 Itanium machine, as its production, Im a little wary about doing this at the moment. Any thoughts or can I use a PARISC version for Itanium ?

Thanks
Paul

Re: Perfview analyser

Luk Vandenbussche — Thu, 24 May 2007 09:12:14 GMT

if you follow the links in the thread you can choose between :

HP-UX 11.0, 11.11 and 11.23 PA-RISC
HP-UX 11.23 Itanium

You need to click the link with the first

Re: Perfview analyser

Paul Thomson_2 — Thu, 24 May 2007 09:20:54 GMT

I already have perfview for 11.11 on a PARISC machine but when I try to connect to the itanium measureware agent, perfview displays

Could not connect to Measureware perflbd on IP address (PV11-31)

As the perflbd daemon does not seem to run under an 11.23 itanium version of measureware, I assumed I needed an 11.23 version of perfivew to connect to the data ?