GCC installation issues

karthiknarayan — Mon, 28 May 2007 10:08:57 GMT

Hi,

I ma trying to install GCC on HP-UX 11.11.but it fails after configure. Below are the steps i did
#./configure
#gmake
cd ../gcc
gmake[2]: *** No rule to make target `all'. Stop.

Can someone tell me the steps to install gcc on HP-UX

Re: GCC installation issues

Steven Schweda — Mon, 28 May 2007 12:48:19 GMT

Are you starting with a source kit? If so,
you might try the procedure described in the
installation instructions:

http://gcc.gnu.org/install/

http://gcc.gnu.org/install/configure.html

http://gcc.gnu.org/install/build.html

[...]

Note (from configure.html):

First, we highly recommend that GCC be built
into a separate directory than the sources
which does not reside within the source tree.

> Below are the steps i did

No, those are the steps after you got some
kind of kit from somewhere, unpacked it
somewhere, and did a "cd" to somewhere, none
of which you've described. If you want
useful advice, it helps to describe
accurately what you have done.

topic GCC installation issues in Operating System - HP-UX

GCC installation issues

Re: GCC installation issues