topic Re: fcmsutil /fcdutil not working in Operating System - HP-UX

fcmsutil /fcdutil not working

Tonya R. Underwood — Tue, 19 Jun 2007 10:06:29 GMT

# fcmsutil /dev/fcd6
ERROR: The installed driver and fcdutil are not compatible
DRIVER Version is 25
FCDUTIL Version is 16
#
# model
9000/800/rp4440
# uname -a
HP-UX cambws01 B.11.11 U 9000/800 2858018719 unlimited-user license
#

fc 6 0/6/1/0 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd6

Any ideas?

This is an itanium.

Re: fcmsutil /fcdutil not working

Court Campbell — Tue, 19 Jun 2007 10:14:27 GMT

fcmsutil is not working because /dev/fcd6 is not a tachyon HBA.

Re: fcmsutil /fcdutil not working

Torsten. — Tue, 19 Jun 2007 10:17:06 GMT

Looks like at least one of them is out of date.
See this link regarding the driver first:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=A6826A

"This is an itanium"

No, it is PA-RISC.

Re: fcmsutil /fcdutil not working

Tonya R. Underwood — Tue, 19 Jun 2007 10:20:31 GMT

Yeah... I meant to erase that "this is an itamium"... rp4440 obviously pa-risc.

Now... regarding the response that this is not a tachyon card... fcmsutil works here (different server - still PA-RISC, same product number card):

fc 3 1/0/10/1/1 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
/dev/fcd3

cambws02:/ # fcmsutil /dev/fcd3

Vendor ID is = 0x001077
Device ID is = 0x002312
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012ba
PCI Mode = PCI-X 133 MHz
ISP Code version = 3.3.18
ISP Chip version = 3
Previous Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0xcb0d00
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x50060b00001dbac3
N_Port Port World Wide Name = 0x50060b00001dbac2
Switch Port World Wide Name = 0x200d00051e34f5fa
Switch Node World Wide Name = 0x100000051e34f5fa
Driver state = AWAITING_LINK_UP
Hardware Path is = 1/0/10/1/1
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.11.08 /ux/kern/kisu/FCD/src/common/wsio/fcd_init.c:Mar 16 2006,19:00:52

cambws02:/ #

Re: fcmsutil /fcdutil not working

Court Campbell — Tue, 19 Jun 2007 10:20:34 GMT

Disregard my post, looks like it should work with that card.

Re: fcmsutil /fcdutil not working

Torsten. — Tue, 19 Jun 2007 10:58:03 GMT

Is fcmsutil up to date?

# what /opt/fcms/bin/fcmsutil
/opt/fcms/bin/fcmsutil:
fcmsutil.c $Date: 2004/10/18 02:45:41 $Revision: r11.11/3 PATCH_11.11 (PHKL_30257)

see
http://www4.itrc.hp.com/service/patch/patchDetail.do?patchid=PHKL_34161&sel={hpux:11.11,}&BC=main|search|patchDetail{PHKL_34161,{hpux:11.11,}}|cart|

Re: fcmsutil /fcdutil not working

Tonya R. Underwood — Tue, 19 Jun 2007 15:55:12 GMT

cambws01:/ # what /opt/fcms/bin/fcmsutil
/opt/fcms/bin/fcmsutil:
fcmsutil.c $Date: 2004/10/18 02:45:41 $Revision: r11.11/3 PATCH_11.11 (PHKL_30257)
You have mail in /var/mail/root
cambws01:/ #

Re: fcmsutil /fcdutil not working

Prashanth.D.S — Tue, 19 Jun 2007 17:43:11 GMT

Hi Tonya,

Can you check if the link mentioned below be helpful to you ..

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1041841&admit=-682735245+1182292791944+28353475

A "what" command on /stand/vmunix showed that the driver wasn't in the kernel..

Best Regards,
Prashanth

Re: fcmsutil /fcdutil not working

K.Vijayaragavan. — Sat, 13 Oct 2007 07:54:32 GMT

I had similar issue displaying same error today with the ITANIUM server having AB379 fc card. This was resolved by copying the /opt/fcms/bin/fcmsutil and other files under /opt/fcms/bin/ from similar server having same type of fc card and same version of FC-FD software product installed.
Better back-up the files before overwritting.