https://community.hpe.com/t5/operating-system-hp-ux/console-display-width/m-p/4028117#M301153 Does anyone know what determines the width of the output displayed after the "HP-UX Start-up in progress" heading? I am running 11.23 on rx4640s. Most of them display the output within the 80 character size display I normally use with Reflections. However, some of them insist on displayed wrapped output. The longer output actually contains exactly 20 extra dots (...) before displaying the status.<BR /><BR />This is NOT related to the Reflections emulator as I use the same exact configuration file on each node.<BR /><BR />Thanks! Wed, 27 Jun 2007 12:00:02 GMT Ken Englander 2007-06-27T12:00:02Z https://community.hpe.com/t5/operating-system-hp-ux/console-display-width/m-p/4028117#M301153 Does anyone know what determines the width of the output displayed after the "HP-UX Start-up in progress" heading? I am running 11.23 on rx4640s. Most of them display the output within the 80 character size display I normally use with Reflections. However, some of them insist on displayed wrapped output. The longer output actually contains exactly 20 extra dots (...) before displaying the status.<BR /><BR />This is NOT related to the Reflections emulator as I use the same exact configuration file on each node.<BR /><BR />Thanks! Wed, 27 Jun 2007 12:00:02 GMT https://community.hpe.com/t5/operating-system-hp-ux/console-display-width/m-p/4028117#M301153 Ken Englander 2007-06-27T12:00:02Z