topic Re: sam does not start in Operating System - HP-UX

sam does not start

cbozlagan — Thu, 28 Jun 2007 05:32:54 GMT

HPUX 11.11

sam does not start

How can I recover this?

Re: sam does not start

Mridul Shrivastava — Thu, 28 Jun 2007 05:42:48 GMT

what are the error messages u r getting??

r u starting it as a root user ?? If not then have the user been given the strcted access to run SAM ??

Re: sam does not start

cbozlagan — Thu, 28 Jun 2007 05:47:45 GMT

hi,

No error message.

# sam
: yes

#

Situation is like abowe. After last enter comes prompt instead of sam menu

Thanks

Re: sam does not start

Dennis Handly — Thu, 28 Jun 2007 05:52:34 GMT

If you want a graphical version, you must export DISPLAY.

Re: sam does not start

BrianDoyle — Thu, 28 Jun 2007 05:58:55 GMT

For SAM gui:
1)
# export DISPLAY=:0.0

2)
# sam &

(& = to run it in the background)

Re: sam does not start

cbozlagan — Thu, 28 Jun 2007 06:05:53 GMT

Hi,
I know GUI usage (Xmanager usage)

I have more than one HPUX system. Only one system has problem like this.

DISPLAY was set accordingly.

Thanks.

Re: sam does not start

Pete Randall — Thu, 28 Jun 2007 06:30:22 GMT

Try running "whence sam" to make sure you're invoking the correct binary:

# whence sam
/usr/sbin/sam

Pete

Re: sam does not start

cbozlagan — Thu, 28 Jun 2007 06:38:25 GMT

Hi pete
#whence sam
/usr/sbin/sam displays on screen

Re: sam does not start

Srinivas Thokala_1 — Thu, 28 Jun 2007 11:11:35 GMT

Verify whether or not 'samd' is running on the system by:
ps -aef |grep sam
if running, it should show the daemon as
/usr/sam/lbin/samd

if running try using full path as
/usr/sbin/sam

-Srinivas

Re: sam does not start

V. Nyga — Fri, 29 Jun 2007 02:21:17 GMT

Hi,

if sam doesn't work the lastest sam patch (PHCO_35520) is recommended:
http://www8.itrc.hp.com/service/patch/patchDetail.do?patchid=PHCO_35520&sel={hpux:11.11,}&BC=main|search|

Also you could check patch level of your different systems.

Volkmar

Re: sam does not start

cbozlagan — Fri, 29 Jun 2007 08:11:15 GMT

Hi V.Nyga,

I downloaded patch and I created .depot file.

How can I install it?

Thanks.

Re: sam does not start

kumar_10 — Fri, 29 Jun 2007 09:53:44 GMT

Dear, The instructions are available in the Text file while sh from PHCO_35520. Refer the below instructions from the same site you have downloaded the patch.

1. Back up your system before installing a patch.

2. Login as root.

3. Copy the patch to the /tmp directory.

4. Move to the /tmp directory and unshar the patch:

cd /tmp
sh PHCO_35520

5. Run swinstall to install the patch:

swinstall -x autoreboot=true -x patch_match_target=true \
-s /tmp/PHCO_35520.depot

By default swinstall will archive the original software in
/var/adm/sw/save/PHCO_35520. If you do not wish to retain a
copy of the original software, include the patch_save_files
option in the swinstall command above:

-x patch_save_files=false

WARNING: If patch_save_files is false when a patch is installed,
the patch cannot be deinstalled. Please be careful
when using this feature.

For future reference, the contents of the PHCO_35520.text file is
available in the product readme:

swlist -l product -a readme -d @ /tmp/PHCO_35520.depot

To put this patch on a magnetic tape and install from the
tape drive, use the command:

dd if=/tmp/PHCO_35520.depot of=/dev/rmt/0m bs=2k

Re: sam does not start

Basheer_2 — Fri, 29 Jun 2007 10:01:21 GMT

Hello,

I had the same problem. to fix, I installed the latest SAM related patches, then it worked ok.

Re: sam does not start

Eric Jacklin — Sat, 30 Jun 2007 10:55:00 GMT

Hi

Did you check top process

Is there any SAMX is running ?

Re: sam does not start

V. Nyga — Mon, 02 Jul 2007 03:42:01 GMT

Hi again,

install in command line or use the GUI with 'swinstall' - then the GUI is opened - give the path where the depot is - mark the patch and use the action install.

Check the messages (the system will verify the patch first, then the installation follows) - should be no problem.

HTH
Volkmar