topic Re: complier in Operating System - HP-UX

complier

CEDTI — Fri, 29 Jun 2007 08:54:14 GMT

Hi
I have the a C++ A-03.30 compiler installed on my pc but my EDA Software requires A-03.63 version.Unfortuntely i dont have the service contract .Is there any solution for this ..?
If i use GCC will it solve my purpose.? if so,please let me know the version of the GCC and from where i can download it and also plz tell me instructions to install GCC .
Thanks in advance

Re: complier

Fat Scrape — Fri, 29 Jun 2007 09:25:56 GMT

Hi,

is PC your personal computer or HP/SUN server?

For HP you can download gcc compiler (with installation instruction) from:

http://hpux.connect.org.uk/hppd/hpux/Gnu/gcc-4.1.2/

For SUN you can download gcc compiler (with installation instruction) from:

http://www.sunfreeware.com/

For Windows: sorry I don't know.

Sorry I don't know if gcc solved the problem for EDA Software.

Regards,

Re: complier

CEDTI — Fri, 29 Jun 2007 09:34:07 GMT

Hi,
Thaks for ur reply. i am using HP-UXB.11.00 verson.
instead of a C++ compiler can we use GCC for B.11.00 ?

Re: complier

Heironimus — Fri, 29 Jun 2007 09:55:52 GMT

You will need to contact whoever provided your EDA software to see if they also support gcc. gcc is not a drop-in replacement for HP's compilers.

Re: complier

Fat Scrape — Fri, 29 Jun 2007 10:00:20 GMT

Why not?

You can install or compile gcc on your HP server.

I use gcc to compile perl and other application.

Regards,

Fat

Re: complier

Dennis Handly — Fri, 29 Jun 2007 22:49:07 GMT

>installed on my pc

(It is bad form to call your HP-UX box a PC.)

>Unfortuntely i dont have the service contract. Is there any solution for this?

Other than purchasing one or the latest aC++ compiler, no.

(How much did your EDA software cost, compared to how much a support contract costs?)

g++ is NOT binary compatible with aC++, so if your EDS Software mentioned aC++, you are out of luck.

Did they say why A.03.30 won't work? Have you tried it anyway?

I assume your EDA software comes in a binary form? Why do you need a compiler? Is this needed for a plugin or customization?

Re: complier

Dennis Handly — Fri, 29 Jun 2007 23:07:25 GMT

I'm not even sure there is a A.03.63 for 11.00. The last version I have listed in A.03.55.

Are you even sure your software is supported for 11.00?

Re: complier

CEDTI — Sat, 30 Jun 2007 05:18:07 GMT

Hello,
i had the service contract for four years.Now its got expired . My probelm is that i have install PHSS_32508,PHSS_32509,PHSS_32004 ,these three patches . We already puraches A.03.30 compiler .When i try to install above patches its giving me error that file set doesnt match.So, wt should i do .....i have to purachase the compiler again ....?

Re: complier

CEDTI — Sat, 30 Jun 2007 05:18:37 GMT

Hello,
i had the service contract for four years.Now its got expired . My probelm is that i have to install PHSS_32508,PHSS_32509,PHSS_32004 ,these three patches . We already purached A.03.30 compiler .When i try to install above patches its giving me error that file set doesnt match.So, wt should i do .....i have to purachase the compiler again ....?

Re: complier

Dennis Handly — Sat, 30 Jun 2007 07:47:29 GMT

>My problem is that i have to install PHSS_32508

This patch requires the base release A.03.55 or A.03.60.

>PHSS_32509, PHSS_32004

These are C.

>So, what should i do i have to purchase the compiler again?

11.00 is out of support. It is not likely you could even purchase that old compiler.
If you had a support contract for aC++ on any other computer, the Response Center may be willing to get you that old version.

As I asked before, why do you need that particular version of aC++? What are you actually compiling?

Re: complier

CEDTI — Sat, 30 Jun 2007 09:11:32 GMT

Hi,
Thanks for ur reply .It requires base version of A-03.60 .
I am using EDA where in i can desing my own Electronic Chips.

Re: complier

Dennis Handly — Sat, 30 Jun 2007 09:16:31 GMT

>It requires base version of A.03.60.

This version of the compiler was never on 11.00. Have you tried the compiler you have?

Re: complier

CEDTI — Sat, 30 Jun 2007 09:33:46 GMT

Ya i have tried and i installed .But for EDA software i need fullfill the patch requirements ....its showing fail ...reason is that PHSS_32508 PHSS_32509 and PHSS_32004 are not installed .....Only the above thre are not installed out 37 patches...I need to fullfill this at any cot....can u plz help out how can i get rid of this....?
Thanks and regards

Re: complier

Dennis Handly — Sat, 30 Jun 2007 10:04:17 GMT

>can you plz help out how can i get rid of this....?

I assume this means you can't just ignore this like you can do with Oracle's checks?

Sorry, I can't do anything unless you go through official channels, the Response Center.

Long term, you'll need to go to a supported OS version, at least 11.11.

Re: complier

CEDTI — Sun, 01 Jul 2007 12:21:41 GMT

Hi Dennis Handly ,
Now i have installed aC++A.03.70 evaluation version .But still i am not able to install PHSS_32508,PHSS_32509 &PHSS_32004.Where can i get the pathc list for this version..?
Plz can u help me out in this

Thanks and regards
Murali

Re: complier

Dennis Handly — Sun, 01 Jul 2007 23:04:40 GMT

>i am not able to install PHSS_32508, PHSS_32509 & PHSS_32004. Where can i get the patch list for this version?

You can't patch the evaluation compiler.

Re: complier

Dennis Handly — Sun, 01 Jul 2007 23:13:18 GMT

>PHSS_32508, PHSS_32509 & PHSS_32004.

And PHSS_32508 & PHSS_32004 are already fixed in A.03.70.