topic Re: How can I change kernel parameters without sam? in Operating System - HP-UX

How can I change kernel parameters without sam?

cbozlagan — Thu, 12 Jul 2007 06:34:37 GMT

How can I change kernel parameters without sam?
thanks

Re: How can I change kernel parameters without sam?

BrianDoyle — Thu, 12 Jul 2007 06:39:08 GMT

You want to modify kernel parameters by CL ?

Do man on kmtune

Re: How can I change kernel parameters without sam?

Oviwan — Thu, 12 Jul 2007 06:40:57 GMT

Hey

check manpage of kctune

e.g.
/usr/sbin/kctune -h -B maxuprc=3780

Regards

Re: How can I change kernel parameters without sam?

Ivan Krastev — Thu, 12 Jul 2007 06:43:04 GMT

Can you specify OS version and platform.

Here is doc about that - http://techsolutions.hp.com/en/5991-6480/ch10.html

regards,
ivan

Re: How can I change kernel parameters without sam?

cbozlagan — Thu, 12 Jul 2007 06:58:23 GMT

HP-UX 11.11

Re: How can I change kernel parameters without sam?

cbozlagan — Thu, 12 Jul 2007 06:59:34 GMT

HP-UX 11.11 PARISC

Re: How can I change kernel parameters without sam?

Steven E. Protter — Thu, 12 Jul 2007 07:08:31 GMT

Shalom,

kmtune will let you do this from the command line.

Read this on putting changes requiring a compile into production.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=105739

The man page for kmtune explains pretty nicely how to make command line changes.

SEP

Re: How can I change kernel parameters without sam?

Geoff Wild — Thu, 12 Jul 2007 07:37:39 GMT

With 11.11 - use kmtune - for 11.23 and 11.31 - kctune.

Eaxample:

kctune vps_ceiling=64

that will set vps_ceiling to 64.

Rgds...Geoff

Re: How can I change kernel parameters without sam?

cbozlagan — Thu, 12 Jul 2007 07:51:36 GMT

I used commands below for HPUX 11.11, but I got errors.

kmtune -s maxswapchunks=16384
kmtune -s msgseg=32767
kmtune -s msgsz=32
kmtune -s msgmnb=65535
kmtune -s msgmni=4096
kmtune -s msgtql=4096
kmtune -s msgmap=4098
kmtune -s msgmax=65535
kmtune -s semaem=16384
kmtune -s semmnu=4092
kmtune -s semmns=8192
kmtune -s semmni=4096
kmtune -s semume=100
kmtune -s semvmx=32767
kmtune -s shmmax=17179869184
kmtune -s shmmni=512
kmtune -s shmseg=200
kmtune -s maxfiles=1024
kmtune -s maxfiles_lim=2048
kmtune -s nflocks=8192
kmtune -s nfile=63488
kmtune -s ninode=34816
kmtune -s maxdsiz=1073741824
kmtune -s maxdsiz_64bit=17179869184
kmtune -s maxssiz_64bit=1073741824
kmtune -s maxuprc=3687
kmtune -s max_thread_proc=250
kmtune -s nkthread=7200
kmtune -s nproc=4096
kmtune -s maxusers=128
kmtune -s dbc_min_pct=5
kmtune -s dbc_max_pct=8
kmtune -u

Error Messages
==============
kmtune: Cannot identify parameter name msgsz
WARNING: max_thread_proc cannot be set dynamically.
WARNING: maxdsiz cannot be set dynamically.
WARNING: maxdsiz_64bit cannot be set dynamically.
WARNING: maxfiles cannot be set dynamically.
WARNING: maxssiz_64bit cannot be set dynamically.
WARNING: maxswapchunks cannot be set dynamically.
WARNING: maxusers cannot be set dynamically.
WARNING: msgmap cannot be set dynamically.
WARNING: msgmni cannot be set dynamically.
WARNING: msgseg cannot be set dynamically.
WARNING: msgtql cannot be set dynamically.
WARNING: nfile cannot be set dynamically.
WARNING: nflocks cannot be set dynamically.
WARNING: ninode cannot be set dynamically.
WARNING: nkthread cannot be set dynamically.
WARNING: nproc cannot be set dynamically.
WARNING: semmni cannot be set dynamically.
WARNING: semmns cannot be set dynamically.
WARNING: semmnu cannot be set dynamically.
WARNING: semume cannot be set dynamically.
WARNING: semvmx cannot be set dynamically.
WARNING: shmmni cannot be set dynamically.
kmtune: Unable to change maxuprc. Out of range.

Re: How can I change kernel parameters without sam?

James R. Ferguson — Thu, 12 Jul 2007 08:36:42 GMT

Hi:

You got errors and WARNINGS.

You misspelled 'msgssz' and you violated a 'maxuprc' range limit. The remainder of your problems are warnings that you are trying to change static kernel parameters. Specifying '-u' means to alter the running kernel without rebuilding it and rebooting.

Regards!

...JRF...

Re: How can I change kernel parameters without sam?

Geoff Wild — Thu, 12 Jul 2007 08:54:01 GMT

cd /stand/build
/usr/lbin/sysadm/system_prep -s system
vi system (make your changes and save the file)
mk_kernel -s system
kmupdate
cd /
reboot your system

Rgds...Geoff

Re: How can I change kernel parameters without sam?

Marcel Burggraeve — Fri, 13 Jul 2007 03:03:30 GMT

If you do it like Geoff explained, make sure you don't use the reboot command but do a shutdown -r.
If you don't, the newly created kernel won't be put in place for the next boot.