topic Re: Ignite error in Operating System - HP-UX

Ignite error

aruns_s — Sat, 11 Aug 2007 05:22:15 GMT

Hi Gurus,

My ignite tape backup is hanging indefinitely after following stuff,

** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive

* Checking Versions of Ignite-UX filesets
===========================================
Everything was working last week, there has been no changes or patch install.

Please advice

Re: Ignite error

Fabian Briseño — Sat, 11 Aug 2007 08:48:43 GMT

hello Aruns.

have you checked /var/adm/syslog/syslog.log for any possible error message ?

also do an ioscan to see if there is a hardware failure.

I once had a similiar problem and it was because one of the harddrives had failed.

Re: Ignite error

TY 007 — Sat, 11 Aug 2007 11:29:56 GMT

Hi,

>> Everything was working last week, there has been no changes or patch install

Log a HP Hardware Support Ticket soon, looks no good if Ignite-UX does not complete, possible Bad Hardware or Filesystem.

Thanks

Re: Ignite error

whiteknight — Sat, 11 Aug 2007 12:02:55 GMT

Hi Arun,

did you check /var/opt/ignite/logs/ignite
See got any clue ?

perform #print_manifest just to confirm if all your hardware paths are claimed.

WK