topic Re: Running a command Simultaniousely. in Operating System - HP-UX

Running a command Simultaniousely.

Ramesh.K.R. — Fri, 24 Aug 2007 02:17:40 GMT

Hi Experts,

I have a peculiar requirement.
I want to run a command, from within a script.
But, the catch is to run two instances of the same command, simultaniousely.
How can i do this ??

Regards,
Ramesh

Re: Running a command Simultaniousely.

Dennis Handly — Fri, 24 Aug 2007 02:29:56 GMT

You put them in the background:
command &
command &
wait # waits for both

Re: Running a command Simultaniousely.

Ivan Krastev — Fri, 24 Aug 2007 02:31:43 GMT

You can try to run both commands into background:

command &
command &

regards,
ivan

Re: Running a command Simultaniousely.

Ramesh.K.R. — Fri, 24 Aug 2007 02:42:09 GMT

Hi,

I have already tried this ...

Sorry, i forgot to add ome more point, this perticular command dosen't take any time to execute ..... !!!
And the important condition with my command is, the secand instance should fail, pointing that another instance of the command is running ..
(the time lag for the command is almost non-existeant)

Ramesh

Re: Running a command Simultaniousely.

Dennis Handly — Fri, 24 Aug 2007 03:05:25 GMT

>And the important condition with my command is, the second instance should fail, pointing that another instance of the command is running

Then you will have to modify your command to detect this. Create a lock file with the PID of the first in a file? Using $! after you background a command will give its PID.

>(the time lag for the command is almost non-existent)

What are you trying to do, write a test case?
Or do real work?

Re: Running a command Simultaniousely.

Ramesh.K.R. — Fri, 24 Aug 2007 04:33:00 GMT

Hi,

Its a TeMIP (OV Product) fcl command.

The command itself has a in-built mechanism to look for running proceses. It fails, if it detects the command running. But, the problem is, it dosen't time to execute & come out ...
But, we have to produce a test case scenario for this ..

Regards,
Ramesh.K.R.

Re: Running a command Simultaniousely.

Dennis Handly — Fri, 24 Aug 2007 04:52:35 GMT

>we have to produce a test case scenario for this

Then try a wrapper around your fcl.
In the wrapper, you will spin in a loop checking to see if a file exists. If it does, then execute fcl.
# wait for signal-file
while [ ! -f signal-file ]; do
: nothing here to see
done
fcl ...

Then do:
wrapper-command &
wrapper-command &
sleep 5 # make them work up a sweat
touch signal-file

Both wrappers should start up fcl about the same time.