topic nis question in Operating System - HP-UX

nis question

navin — Tue, 28 Aug 2007 12:42:25 GMT

Hello ,
What is the procedure to change the NIS master of a slave .
Thanks.
please advice.

Re: nis question

Steven E. Protter — Tue, 28 Aug 2007 12:50:32 GMT

Shalom,

You need to copy the yp database files to /var/yp from the current master server.

Then change /etc/rc.config.d/namesvrs to reflect the status change.

ypinit

ypmake

Fix any errors encountered in the process aove.

SEP

Re: nis question

Robert-Jan Goossens — Tue, 28 Aug 2007 13:34:01 GMT

Navin,

You can use the same steps described in this document, just stop the nis processes before you start.

# /sbin/init.d/nis.server stop

# /sbin/init.d/nis.client stop

Title: Steps to setup a NIS Master Server, NIS Slaves, and NIS Clients
Document ID: emr_na-c00904703-4

US
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c00904703-4

Europe
http://www8.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c00904703-4

Regards,
Robert-Jan

Re: nis question

Robert-Jan Goossens — Tue, 28 Aug 2007 14:14:13 GMT

add on

3.13: How to Change IP address, Host Name, or domainname.

If you are changing the IP address, host name or domainname of a NIS machine, you must tear down NIS on the affected machine, make the changes, and then rebuild it. The standard procedure is: 1) remove the NIS files and reboot, per Section 3.7 or 3.8 2) edit the appropriate files to make the desired changes 3) rebuild your NIS environment per sections 3.1 through 3.5 If you are removing a NIS master server permanently you should choose a new machine to be the master and update the ypservers file and rebuild that new machine as the master. If you are removing a NIS slave server permanently you should make sure you update the ypservers file.

http://docs.hp.com/en/5992-0715/ch04s03.html#bjachcga