topic Re: how to install hp1050c plotter in Operating System - HP-UX

how to install hp1050c plotter

Sandeep Daphal — Thu, 04 Oct 2007 04:48:52 GMT

how to install hp1050c plotter it is connected to network ?
I am trying to install form jetdirect Utility through bootp but it is giveing following error

Enter the printer's LAN hardware address: 0030c1d41676

Probing the hardware interface for identity. This could
take few seconds....

Problem encountered during this process which could be one of the following:

1] The device is not in the network
2] The device is already configured with another IP address,
(thro DHCP/BOOTP), Remove it and start again.
3] Hardware interface is not an official HP Jetdirect

Take a test page of the Jetdirect from the printer.
If you see no IP address assigned, or if it is 0.0.0.0,
wait for around 5 minutes. It will default to
192.0.0.192(if it is HP jet direct) This will help in
identifying the Hardware interface and continuing the configuration.

please tell me setp how to install plotter?

Re: how to install hp1050c plotter

Dennis Handly — Thu, 04 Oct 2007 04:57:47 GMT

Are you trying to install this on HP-UX?

Re: how to install hp1050c plotter

Sandeep Daphal — Thu, 04 Oct 2007 22:25:51 GMT

yes it's HP-ux 11i

Re: how to install hp1050c plotter

Prasanth V Aravind — Fri, 05 Oct 2007 00:55:21 GMT

Hi sandeep,

you may can try these steps

1. Install jetdirect utility on one of your window machine.
2. Assign ip-address to plotter ( I have seen that in windows detect all jetdirect printers automatically )
3. First configure your plotter on windows machine and test it
4. Install hpdirect utility on hpux macine
5. install / configure plotter by giving the IP-address

Thanks & Regards
Prasanth