topic Re: lug admin command showing not found in Operating System - HP-UX

lug admin command showing not found

sajan joseph — Wed, 10 Oct 2007 06:07:23 GMT

lugadmin -e
/sbin/sh: lugadmin: not found.

our system is B 11.23

Re: lug admin command showing not found

Duncan Edmonstone — Wed, 10 Oct 2007 07:07:27 GMT

isn't lugadmin a 11.31 command only?

HTH

Duncan

Re: lug admin command showing not found

Torsten. — Wed, 10 Oct 2007 07:20:42 GMT

Have a look at this:

http://docs.hp.com/en/5991-7436/ch01s02.html

HP-UX 11i Version 3 Highlights
->
Longer User and Group Names

and this

http://docs.hp.com/en/5991-6469/ch05s46.html

You need to run 11.31 (aka 11iv3).

Re: lug admin command showing not found

Bill Hassell — Wed, 10 Oct 2007 07:22:45 GMT

ligadmin is in /usr/sbin.

The /usr/sbin path should ALWAYS be in root's PATH and set by editing .profile for root. You may wish to add /usr/lbin to root's PATH too.

Re: lug admin command showing not found

Pete Randall — Wed, 10 Oct 2007 07:25:32 GMT

I think Duncan has nailed it. There's no man page for lugadmin in the 11iV2 man pages, but there is in 11iV3.

http://www.docs.hp.com/en/hpuxman_pages.html

Pete

Re: lug admin command showing not found

AwadheshPandey — Wed, 10 Oct 2007 07:29:06 GMT

To enable long user and group names,

1. Stop the pwgrd daemon.

# /sbin/init.d/pwgr stop
2. Run the lugadmin command with the -e option.

# lugadmin -e [-d num]

3. The command requests confirmation before enabling the system.

Long user/group name once enabled cannot be disabled in future.
Do you want to continue [yY]: If you respond with y or Y, the command proceeds; otherwise, it aborts.

4. The command creates the /etc/default/lugname file.

5. If the -d option is not specified, num defaults to 0. The specified or default value of num is written in lugname.

Setting the User and Group Name Display Width
The long user and group name default display width is set when lugadmin is executed with the -e option. It can be changed at any time by executing lugadmin with the -d option.

If -d is not specified with the -e option, the value of num defaults to 0.

http://docs.hp.com/en/B2355-60130/lugadmin.1M.html