topic Re: refer to jetadmin in Operating System - HP-UX

refer to jetadmin

defhoon — Wed, 05 Sep 2001 05:47:52 GMT

In jetadmin, adding a printer to local spooler, if there is no HP model in HP-UX10.xx system, how can i add a printer to spooler.
there is no unix driver of Hp 1050c plotter....

Re: refer to jetadmin

Thierry Poels_1 — Wed, 05 Sep 2001 05:56:44 GMT

hi,
try one of the available models:
dumb plotter (might work for any non-HP plotter)
another HP plotter

good luck,
Thierry.

Re: refer to jetadmin

Animesh Chakraborty — Wed, 05 Sep 2001 06:02:41 GMT

hi,
You can choose either of these two and try:-

52) To Select dumbplot model script for plotter
57) HP Plotter not given in this list

Best of luck
Animesh

Re: refer to jetadmin

Sanjay_6 — Wed, 05 Sep 2001 06:03:28 GMT

hi,

in jetadmin when you define the ip for the plotter the system should automatically query and pich up a compatible driver.

Give it a try.

Thanks

Re: refer to jetadmin

Ravi_8 — Wed, 05 Sep 2001 06:27:51 GMT

Hi,
all hp printer models will be in jetadmin, and the drivers too. don't assume things....

later
ravi

Re: refer to jetadmin

Stefan Schulz — Wed, 05 Sep 2001 06:36:43 GMT

We have JetAdmin 6.21 installed and had no problems adding a HP 1050C to the spooler.

I haven't been asked to choose a driver. So there is support for the HP1050C.

Which version of JetAdmin are you using? If its not 6.21 or higher try to upgrade.

If you don't want to upgrade, you should be able to use the HP750C driver for this model.

Hope this helps.

Regards Stefan