topic Re: HBA information in Operating System - HP-UX

HBA information

kelvin567 — Tue, 30 Oct 2007 08:32:31 GMT

Hello ,
From ioscan output i got the following information

Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/4/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 1/10/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td1

Currently I have HP ux 11.0 installed
how to check whether this hba is supported by hp ux 11.11

Re: HBA information

Torsten. — Tue, 30 Oct 2007 08:35:35 GMT

You need to find the product number.

Either look for a sticker on the card or run

# fcmsutil /dev/td1 vpd

Please read this too:

http://forums1.itrc.hp.com/service/forums/helptips.do?#33

Re: HBA information

Torsten. — Tue, 30 Oct 2007 08:36:58 GMT

Hm, I thought you're asking for 11.23 support, right?

Re: HBA information

Geoff Wild — Tue, 30 Oct 2007 08:45:06 GMT

Another command to use is:

fcmsutil /dev/td0

Check release notes for supported hardware:

http://docs.hp.com/en/5992-2331/5992-2331.pdf

Rgds...Geoff