https://community.hpe.com/t5/operating-system-hp-ux/autoloader/m-p/2575456#M31090 I am running HP-UX 11 on an HP9000/800 system.<BR />I have an HP-C6366A autoloader tape drive but I do not have Omniback or any similar software. I have configured a device /dev/picker and this has been tested using the compiled program scsi_io.c and I can use the mc command to interrogate the juke box. Is it possible to use fbackup and have the tape change automaticaly when it is full, and if so how can I do this. Wed, 05 Sep 2001 10:59:48 GMT Dave_32 2001-09-05T10:59:48Z https://community.hpe.com/t5/operating-system-hp-ux/autoloader/m-p/2575456#M31090 I am running HP-UX 11 on an HP9000/800 system.<BR />I have an HP-C6366A autoloader tape drive but I do not have Omniback or any similar software. I have configured a device /dev/picker and this has been tested using the compiled program scsi_io.c and I can use the mc command to interrogate the juke box. Is it possible to use fbackup and have the tape change automaticaly when it is full, and if so how can I do this. Wed, 05 Sep 2001 10:59:48 GMT https://community.hpe.com/t5/operating-system-hp-ux/autoloader/m-p/2575456#M31090 Dave_32 2001-09-05T10:59:48Z https://community.hpe.com/t5/operating-system-hp-ux/autoloader/m-p/2575457#M31091 Have you looked at this thread:<BR /><BR /><A href="http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0xd4b0e7613948d5118fef0090279cd0f9,00.html" target="_blank">http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0xd4b0e7613948d5118fef0090279cd0f9,00.html</A><BR /><BR /> Wed, 05 Sep 2001 12:25:48 GMT https://community.hpe.com/t5/operating-system-hp-ux/autoloader/m-p/2575457#M31091 harry d brown jr 2001-09-05T12:25:48Z