topic Ignite backup not responding in Operating System - HP-UX

Ignite backup not responding

Shrikant Lavhate — Tue, 06 Nov 2007 06:07:52 GMT

Hi all,

I m running HPUX 11.00 on N class rp7400 and Ignite B.3.7.96 installed.
When ignite backup is attempted process halts at the last message
________________________________________________
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2007-11-05,10:36/system_cfg vg00
________________________________________________

on screen.

Process status then went to sleeping. Can anyone comment on this? what is wrong goin on?

Re: Ignite backup not responding

Laerte Cardoso — Tue, 06 Nov 2007 07:22:32 GMT

Hi Shrikant,

I think there is a problem with a vg00 configuration. Try "vgdisplay -v vg00 | pg". All disk are available? no messages erros?

Re: Ignite backup not responding

Shrikant Lavhate — Tue, 06 Nov 2007 07:33:13 GMT

Laerte Cardoso,

I already checked and there is no problem with vg00. Its good with no error mesages.
Looking forward for your comment.

-=ShRi=-

Re: Ignite backup not responding

Vijay Dsouza — Tue, 06 Nov 2007 07:34:07 GMT

Hi Srikant,

Yes first look at the vg00 configuration.
Secondly check for the latest pax patch on the system.
How long does the process sleep ? If its taking more than an hour at the same point there might be an issue with the configuration. . verify the basics and then proceed with the ignite backup again.

Cheers

Vijay