drd rucmd problem

j773303 — Sun, 18 Nov 2007 22:20:04 GMT

Hello expert,
I've a question about DRD (Dynamic Root Disk).
I've clone a disk by DRD, and try to use
==============================================
swinstall -s /home/imkuo/lsof-4.78-ia64-11.23.depot
[OK]
=============================================

But swinstall analysis would failed why use drd runcmd as below:

#drd runcmd swinstall -s
/home/imkuo/lsof-4.78-ia64-11.23.depot

#view swagentd.log

======= 11/13/07 12:16:21 EAT BEGIN swagentd (pid = 1789).

* Registered RPC protocol "ncacn_ip_tcp" with endpoint "2121".
* Registered RPC protocol "ncadg_ip_udp" with endpoint "2121".
* Checking job queue at 1 minute intervals.
* Started install agent on "/" for root@f14r06, pid=12192,
11/16/07 17:05:06 EAT
* Started source agent on
"/home/imkuo/lsof-4.78-ia64-11.23.depot" for root@f14r06,
pid=12193, 11/16/07 17:05:06 EAT
NOTE: The target "/home/imkuo/lsof-4.78-ia64-11.23.depot" currently
open for reading is a tape. pid=12193 11/16/07 17:05:06 EAT
* Agent pid=12193 completed. 11/16/07 17:05:08 EAT
* Agent pid=12192 completed. 11/16/07 17:05:08 EAT
* Started source agent on
"/home/imkuo/lsof-4.78-ia64-11.23.depot" for root@f14r06,
pid=12265, 11/16/07 17:05:46 EAT
NOTE: The target "/home/imkuo/lsof-4.78-ia64-11.23.depot" currently
open for reading is a tape. pid=12265 11/16/07 17:05:46 EAT
* Agent pid=12265 completed. 11/16/07 17:05:48 EAT
==============================================

Then I've try to "drd runcmd" application CD, the swinstall is fine.

Does anyone can advise why #drd runcmd swinstall -s /home/imkuo/lsof-4.78-ia64-11.23.depot can not pass through the swinstall analysis ? Thanks.

Re: drd rucmd problem

Sunya_1 — Sun, 08 Feb 2009 19:30:26 GMT

Have you ever try this.. because you are viewing the active disk

#drd runcmd view swagentd.log

topic drd rucmd problem in Operating System - HP-UX

drd rucmd problem

Re: drd rucmd problem