topic Re: Deleting patches from /var/adm/sw/save in Operating System - HP-UX

Deleting patches from /var/adm/sw/save

Ramprasath_1 — Fri, 07 Dec 2007 05:44:22 GMT

Hi all,

Pls suggest me whether i can delete patches under /var/adm/sw/save. It is occupying lot of space. Old patches and superseeded patches for the same is stored here. I want to know if i delete the old patch, will it affect? What steps need to be carry out?

Thanks in advance
Ramprasath G

Re: Deleting patches from /var/adm/sw/save

Wouter Jagers — Fri, 07 Dec 2007 06:07:25 GMT

Hi there,

Check out the 'cleanup' command, it is designed to commit patches which have been superseded a number of times.

You can manually commit paches using the option '-x patch_commit=true' to swmodify.

Hope that helps.

Cheers,
Wout

Re: Deleting patches from /var/adm/sw/save

AwadheshPandey — Fri, 07 Dec 2007 06:27:19 GMT

http://www.faqs.org/faqs/hp/hpux-faq/section-161.html

Regards,

Awadhesh

Re: Deleting patches from /var/adm/sw/save

Torsten. — Fri, 07 Dec 2007 06:28:30 GMT

Never delete anything in /var/adm/sw!

This will corrupt your software database.

See "man cleanup" instead.

Re: Deleting patches from /var/adm/sw/save

Geoff Wild — Fri, 07 Dec 2007 14:43:01 GMT

cleanup -c 1

or cleanup -c 2

man cleanup for more valuable info :)

Rgds...Geoff

Re: Deleting patches from /var/adm/sw/save

Tim Nelson — Fri, 07 Dec 2007 15:52:33 GMT

As mentioned cleanup does a great job managing this. I always run after a patch load to cleanup -2 revs.

I have also successfully used a separate filesystem for this in the past.

Re: Deleting patches from /var/adm/sw/save

HGN — Fri, 07 Dec 2007 18:39:15 GMT

Hi

Please assign points to posting , you have assigned 9 out of the 18 feed back

Rgds

HGN

Re: Deleting patches from /var/adm/sw/save

Bob E Campbell — Tue, 11 Dec 2007 21:23:55 GMT

Anytime you are about to commit old patches or install new ones I strongly recommend that you create an IUX recovery image. There is no such things as too many ways to remove a committed patch...

If you have spindles (or SAN) handy, a DRD clone would work as well. I just love the warm fuzzy of a recovery tape in a different building though.

Bob

Re: Deleting patches from /var/adm/sw/save

whiteknight — Wed, 12 Dec 2007 03:27:18 GMT

Ram,

cleanup Command
The cleanup utility is used ...
â ¢ to remove any patches for earlier releases from the Installed Product Database (IPD) after updating to a newer version of HP-UX.
â ¢ to commit patches across the entire system, i.e to remove patch rollbacks.
â ¢ to remove patches from a software depot if they have been superseded by patches also available in the same depot.
cleanup logs all information to /var/adm/cleanup.log.
Refer to the cleanup manual page for details.

example: cleanup -c 2

WK

Re: Deleting patches from /var/adm/sw/save

yulianto piyut — Wed, 12 Dec 2007 06:27:05 GMT

be carefull to delete patches under /var/adm/sw/save. Patches have been deleted can't be uninstall.
the command to delete old patches that superseded by other pathces is "cleanup". do man cleanup.
# cleanup -c 1 or
# cleanup -c 2
you will be verify what patches that will be deleted.

-yut-