topic Re: Jetadmin addqueue issue. in Operating System - HP-UX

Jetadmin addqueue issue.

Patrick Ware_1 — Wed, 23 Jan 2008 18:02:34 GMT

Hello all,

I wrote a script that adds printer queues to our servers. It is based on the addqueue command. I have noticed on a couple of the servers, I get the following error:

ssh server7 /opt/hpnp/bin/addqueue -i 9991 -q somequeue -h 10.10.10.145

Could not create the queue

Why would I get this error? What would keep the queue from being created, and what should I look for?

Re: Jetadmin addqueue issue.

Patrick Ware_1 — Wed, 23 Jan 2008 19:23:56 GMT

Interesting enough, hours later, I tried to add the queue again, and it worked! I am almost under the impression that when I tried to add the printer to the servers earlier, the queue could not be stopped to add the printer queues.

Re: Jetadmin addqueue issue.

Patrick Ware_1 — Wed, 23 Jan 2008 21:06:15 GMT

Oh, one more thing I added to the begining of the line was the following:

lpshut ; lpsched ; sleep 02

Re: Jetadmin addqueue issue.

A. Clay Stephenson — Wed, 23 Jan 2008 21:33:53 GMT

Anytime a new queue is added to the lp subsystem the scheduler must be stopped and then restarted afterwards. Your "addition" was not an option and in fact, you need to change it to 1) lpshut 2) addqueue 3) lpsched.

(This is one of the nice features of the newer lp subsystem available on 11.31 in that queues can be added "on the fly".)

Re: Jetadmin addqueue issue.

Bill Hassell — Thu, 24 Jan 2008 04:07:05 GMT

Another possibility is that the printer was not working correctly at the time the printer was added. addqueue will request details from the printer such as model number and if the printer does not respond as expected, you might get the reported error. Using hpnpadmin is a good way to verify the remote printer before running addqueue. Options -Ai is a good start.