topic Re: Web console display problem in Operating System - HP-UX

Web console display problem

Eric Ladner — Wed, 19 Sep 2001 13:15:53 GMT

I'm using a web console on an A180 while trying to do an ignite of the server remotely. Unfortunately, the display is hopelessly garbled like when the terminal is not set correctly and you try to run the character version of SAM.

I've tried both settings of the web console's terminal (vt100 and HP2392) and both produce similar results.

Has anybody had any success with this?

Note this is basically the install UI executing during boot time so there's no way to change the terminal settings on the source system (that I know of).

Thanks,

Eric

Re: Web console display problem

John Waller — Wed, 19 Sep 2001 14:08:27 GMT

I had a similar problem and it turned out to be the web-broser I was using. Apparently their is a problem with some types of early IE4 (Internet Explorer 4) and I got around the problem by using Netscape Navigator.

Re: Web console display problem

Scott_14 — Wed, 19 Sep 2001 14:20:00 GMT

hi:

we have several and they are set to hp, but the version of netscape is 4.6, try and check your version of your browser. You probably already tried reseting the console it self?

scott

Re: Web console display problem

William Baines — Wed, 19 Sep 2001 14:38:29 GMT

Eric,

Check your firmware rev in the Secure Web Console. I had similar problems with missing characters and scambled displays under version 1.8 of the firmware. I upgraded to the current 1.9 and have had no problems since then.

Here's my version report:

HP Secure Web Console

Global version: A1.9
Software version: A.01.09.001
Boot version: A.01.09.001
Resources version: A.01.09.001