topic Re: fbackup(3003): normal EOT in Operating System - HP-UX

fbackup(3003): normal EOT

csreenivas — Wed, 02 Apr 2008 21:23:53 GMT

I have observed the below error in fbackup.log file.

fbackup(3003): normal EOT
fbackup(3310): enter '^[yY]' when volume 2 is ready on /dev/rmt/0m,
or '^[nN]' to discontinue:
fbackup(3004): writer aborting
fbackup(1002): Backup did not complete : Reader or Writer process exit

Looks file the tape is full. Can you please suggest me how to proceed on this?
Is it possible to restore the data from the tape which is full?

Re: fbackup(3003): normal EOT

Bill Hassell — Thu, 03 Apr 2008 01:29:55 GMT

The backup has not completed because you are backing up more data than will fit on the tape. fbackup paused to ask the operator to change tape. However, this backup was run as a batch or cron job so there is not operator and the backup terminated without finishing the backup.

> Looks file the tape is full.

Correct.

> Can you please suggest me how to proceed on this?

Reduce the scope of the backup (less files) or start the backup and wait until it asks for another tape. Change tapes then answer "y" to continue the backup.

> Is it possible to restore the data from the tape which is full?

Yes, everything that was stored on the tape can be recovered. Anything that was still waiting for backup when fbackup terminated does not exist on tape.

Re: fbackup(3003): normal EOT

newadmin_1 — Tue, 13 Oct 2009 03:20:06 GMT

hi! i would to know how to check if the that was used here is full?

Re: fbackup(3003): normal EOT

Dennis Handly — Tue, 13 Oct 2009 03:28:45 GMT

>newadmin: I would to know how to check if the that was used here is full?

You should be creating your own thread so you can assign points. If there is anything useful here, you can include a URL.