https://community.hpe.com/t5/operating-system-hp-ux/setting-up-remote-printers/m-p/2585413#M32240 Hi <BR />See man lpadmin the -m switch will define whice model - models can be found in /usr/lib/lp/model.<BR /><BR />In would try laserjetIII first.<BR /><BR /><BR />Paula<BR /> Wed, 26 Sep 2001 16:31:37 GMT Paula J Frazer-Campbell 2001-09-26T16:31:37Z https://community.hpe.com/t5/operating-system-hp-ux/setting-up-remote-printers/m-p/2585412#M32239 As usual I had a school district under my umbrella that purchased a NON-HP printer and want to print to it.. It has an internal printer server (non-jetdirect.) they claim to be PCL5 compliant..<BR /><BR />I setup up the printer in SAM and it does print however it only appears to print ASCII stream rather then PCL. <BR /><BR />I am looking at lpadmin and would appreciate insight into how to create a queue that uses a specific hp model such as the HPLJ5 .. .<BR /><BR />Any insight would be appreciated.<BR /><BR />Rex Mueller <BR />Educational Service Unit #3, Omaha NE Wed, 26 Sep 2001 15:20:11 GMT https://community.hpe.com/t5/operating-system-hp-ux/setting-up-remote-printers/m-p/2585412#M32239 rmueller58 2001-09-26T15:20:11Z https://community.hpe.com/t5/operating-system-hp-ux/setting-up-remote-printers/m-p/2585413#M32240 Hi <BR />See man lpadmin the -m switch will define whice model - models can be found in /usr/lib/lp/model.<BR /><BR />In would try laserjetIII first.<BR /><BR /><BR />Paula<BR /> Wed, 26 Sep 2001 16:31:37 GMT https://community.hpe.com/t5/operating-system-hp-ux/setting-up-remote-printers/m-p/2585413#M32240 Paula J Frazer-Campbell 2001-09-26T16:31:37Z