topic Re: Error message after installe some patch in Operating System - HP-UX

Error message after installe some patch

Mousa55 — Tue, 13 May 2008 08:52:07 GMT

i need to install patch in my server rp8420 (11i) but there some error message is appeared after applayed this command on some patch, e.g
#sh /tmp/PHNE_31097 :Syntax error at line 5706 : `<<' is not matched
how to solve this problem?

Re: Error message after installe some patch

Ivan Krastev — Tue, 13 May 2008 08:56:38 GMT

Try to download patch again. Maybe it is corrupt.

regards,
ivan

Re: Error message after installe some patch

Sajjad Sahir — Tue, 13 May 2008 09:58:30 GMT

Dear Nejad

do u want to install only this single patch
download from itrc site in u windows system
do ftp put one of u local directory then remove extension. after that u can install
by using swinstall command

thanks and regards

Sajjad

Re: Error message after installe some patch

Prabhu Hosmani — Tue, 13 May 2008 10:23:09 GMT

Hi,
patch what you downloaded is corrupted.
so download patch from itrc and ftp this patch to server and create depot of this patch and install it by swinstall command

regards,
Prabhu H

Re: Error message after installe some patch

Jeeshan — Tue, 13 May 2008 10:26:29 GMT

Hi Nejad

What procedure you have applied to install the patch?

Re: Error message after installe some patch

Dennis Handly — Wed, 14 May 2008 09:57:47 GMT

#sh /tmp/PHNE_31097 :Syntax error at line 5706 : `<<' is not matched
>how to solve this problem?

As others have mentioned the patch is corrupt.
You should find the here document with the "<<" and see if you can find the end of the here document. You have probably truncated the shar file.

Re: Error message after installe some patch

Yogeeraj_1 — Wed, 14 May 2008 10:05:58 GMT

hi,

in case, you downloaded the patch on a windows machine and then transferred it to your rp8420 afterwards. Make sure it was done in binary mode.

hope this helps too!
kind regards
yogeeraj