topic Re: Boot error please Help! in Operating System - HP-UX

Boot error please Help!

Peter84 — Fri, 23 May 2008 07:41:32 GMT

I have an rp5470 with 11.11 Dic01
I must upgrade internal scsi with new firmware.
I downloaded 44.12 firmware version and make boot tape. After upgrading, system reboots and I have this error:

************* SYSTEM ALERT **************
SYSTEM NAME: t1mmsfe1a-console
DATE: 05/23/2008 TIME: 07:50:53
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

REASON FOR ALERT
SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk SOURCE ID: 0
PROBLEM DETAIL: 3 = functional failure

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH ON ON ON
LED State: Boot Failed. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0x000000F386001480 00000000 00000000 - type 0 = Data Field Unused
0x580008F386001480 00006C04 17073235 - type 11 = Timestamp 05/23/2008 07:50:53
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************

Other similar rp5470 havent this error after upgrading and works ok!

Re: Boot error please Help!

Torsten. — Fri, 23 May 2008 07:49:07 GMT

Did you reach the boot menu?
First step I would do is to check the boot path, if this has the right setting.

Can you see the disks if you do a SEArch command?

Re: Boot error please Help!

Peter84 — Fri, 23 May 2008 08:09:52 GMT

Yes I see all 4 int-scsi disk + tape

Re: Boot error please Help!

Torsten. — Fri, 23 May 2008 08:26:42 GMT

Did you check the boot path settings? Are you able to boot?

Re: Boot error please Help!

Peter84 — Fri, 23 May 2008 08:57:16 GMT

No I do not boot if I take "boot pri" or "boot alt", I have this same error.

Re: Boot error please Help!

Torsten. — Fri, 23 May 2008 09:05:45 GMT

What is the output of

Main Menu: Enter command or menu > pa

Re: Boot error please Help!

Saravanan_rg — Fri, 23 May 2008 09:18:54 GMT

Hi,

u log in pdc menu mode at select enter command mode
In command mode through search boot device. After insert hp ux bootable cd go to recovery console mode try it.