topic Re: Telnet problem in Operating System - HP-UX

Telnet problem

Samiuddin — Mon, 02 Jun 2008 11:59:33 GMT

Hi,

When i try to telnet my server from windows workstation i am getting a screen with message:

***************************************
OC://WebConnect SNA Access server.....
TS> ! vt100,5250

Could anyone help me to get telnet from any workstation type.

Thanks,

Re: Telnet problem

Torsten. — Mon, 02 Jun 2008 12:04:08 GMT

Have a look at

http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1212411806618+28353475&threadId=1235751

Re: Telnet problem

TTr — Mon, 02 Jun 2008 12:31:23 GMT

If you are indeed connecting to an HP-UX server then the standard HP-UX telnet service on your UNIX server has been replaced by the OpenConnect Webconnect access server.

http://www.openconnect.com/legacymodernization/wc.jsp

Most likely you can no longer use standard telnet.

The way these web based products work is the provide you with a web server and you connect to it via a standard web server in https (secure) mode. Then once on the web page you can run a telnet applet that gives you telnet access to the HP-UX server.

This telnet access is encapsulated within the https connection.