https://community.hpe.com/t5/operating-system-hp-ux/persistent-binding/m-p/4209274#M325913 Hi,<BR /><BR />How do I set up persistent binding from HBA FC, to my SAN ?<BR /><BR />11.23<BR />A9784-6000 2 PCI/PCI-X Fibre Channel FC/GigE<BR /><BR />Any information will be really helpful,<BR /><BR />Best regards,<BR /><BR />Marco, Mon, 02 Jun 2008 21:32:10 GMT Marco A. 2008-06-02T21:32:10Z https://community.hpe.com/t5/operating-system-hp-ux/persistent-binding/m-p/4209274#M325913 Hi,<BR /><BR />How do I set up persistent binding from HBA FC, to my SAN ?<BR /><BR />11.23<BR />A9784-6000 2 PCI/PCI-X Fibre Channel FC/GigE<BR /><BR />Any information will be really helpful,<BR /><BR />Best regards,<BR /><BR />Marco, Mon, 02 Jun 2008 21:32:10 GMT https://community.hpe.com/t5/operating-system-hp-ux/persistent-binding/m-p/4209274#M325913 Marco A. 2008-06-02T21:32:10Z https://community.hpe.com/t5/operating-system-hp-ux/persistent-binding/m-p/4209275#M325914 IMHO it is always a persistent binding by default, because you get a fixed hardware path to the LUN and fixed special device files. This could be different with different operating systems, but not with hp-ux.<BR /><BR />You may get problems if you connect any cable to different switch ports (array - switch connection) or if you use a wrong presentation mode (e.g. windows instead of hp-ux). Tue, 03 Jun 2008 05:01:57 GMT https://community.hpe.com/t5/operating-system-hp-ux/persistent-binding/m-p/4209275#M325914 Torsten. 2008-06-03T05:01:57Z