topic Re: CIM_ERR_FAILED in Operating System - HP-UX

CIM_ERR_FAILED

lcmg-unix — Wed, 02 Jul 2008 23:18:00 GMT

Hi guys,

I have been getting this error on one of my servers syslog. The server is hpux 11.11. Have anyone seen this before? Should i be worry about it? thanks

syslog: icodd: ERROR: The following low-level error occurred:ERROR: Failure reading Partition Profile.ERROR: The following low-level WBEM error occurred: CIM_ERR_FAILED: A general error occurred that is not covered by a more specific error code: @3:Firmware error.[Error from hdc_pd_info. \(HDC-9\)]

Re: CIM_ERR_FAILED

Torsten. — Thu, 03 Jul 2008 04:57:32 GMT

Does this occur after changing something? What is the server model? Are you using icod/icap?

Re: CIM_ERR_FAILED

YAQUB_1 — Thu, 03 Jul 2008 05:01:47 GMT

Hi,

Pls put the below command:-

# uname -a
# model
# ioscan -fnC processor

BR/
Yaqub

Re: CIM_ERR_FAILED

lcmg-unix — Thu, 03 Jul 2008 05:03:30 GMT

No, nothing change lately.. no firmware update or cpu turn on. Yes, we do use the icod. The model is RP8420.

Re: CIM_ERR_FAILED

Torsten. — Thu, 03 Jul 2008 05:06:17 GMT

Can you run the parstatus command?

Sometimes it could be hard to find the reason for all this.

See this recent thread:

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1233972