topic Re: Install HP-UX on a Smart Array 6404 in Operating System - HP-UX

Install HP-UX on a Smart Array 6404

Jason Martens — Fri, 18 Jul 2008 19:23:29 GMT

Hello all,
I have a new rp3440, and I would like to install hp-ux 11v3 on it. This machine has three disk drives and a Smart Array 6404 controller (A9891A), which I want to configure in a raid 5 array for booting/data. According to the manual, to set up the controller as a boot device, I need to boot to HP-UX using Ignite. I have an ignite server, but it is in a different subnet, and running HP-UX 11v1 (there is no way to put them in the same subnet without physically moving the machine). The manual says you can boot from the HP-UX install and Recovery DVD to connect to the ignite server, but I was unable to do this with my DVD (11v3). I could not find the ignite server option.

Sooo, my question is: Has anyone done this before and/or know a different way to do it?

tia,
Jason Martens

Re: Install HP-UX on a Smart Array 6404

Torsten. — Fri, 18 Jul 2008 19:33:34 GMT

Complicated situation. this is not only one question - but many.

First set up the smart array to have a valid boot disk:

http://docs.hp.com/en/J6369-90051/ch02s14.html#chddbceb

Now you need to configure an ignite server to install from - boot from install DVD and assign the ignite server as source - see

http://docs.hp.com/en/IUX

for much more information.

Re: Install HP-UX on a Smart Array 6404

Tim Nelson — Fri, 18 Jul 2008 19:40:52 GMT

If the ignite server is on a different subnet then use a boot helper CD or tape.

The CD or tape must be the same version of ignite that the ignite server is.

you can create a DVD iso image or tape using make_media_install, read the script /opt/ignite/data/scripts/examples/make_media_install or the Ignite Admin guide for more info.

Re: Install HP-UX on a Smart Array 6404

Jason Martens — Fri, 18 Jul 2008 19:42:53 GMT

Alright, I'll give that a try on Monday and see what happens. Thanks.

Re: Install HP-UX on a Smart Array 6404

Torsten. — Fri, 18 Jul 2008 19:46:36 GMT

Just to add this information - you don't need an ignite server to setup the RAID, an install DVD is really enough:

"...
Start Ignite-UX from the HP-UX 11i v1 Core OS Install and Recovery Media. The Ignite-UX Welcome screen displays..."

See my link above!

Re: Install HP-UX on a Smart Array 6404

Jason Martens — Fri, 18 Jul 2008 19:54:26 GMT

Ahh, great point. Thanks, I'll try that.