topic Re: INIT: Command is respawning too rapidly. in Operating System - HP-UX

INIT: Command is respawning too rapidly.

HP-FMS — Wed, 01 Oct 2008 23:32:00 GMT

hi all

i have restored my server rx3600 from last ignite backup properly.But after restoration the sever is up but giving some errors for some commands, also giving one message that mentioned below...

INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:cim1 "/opt/wbem/sbin/cimserverd"

waiting for the reply..

thanks in advance
Prasanth Thomas

Re: INIT: Command is respawning too rapidly.

Dennis Handly — Thu, 02 Oct 2008 00:27:39 GMT

Is there a log in /var/adm/syslog/ or somewhere that mentions errors with cimserverd or cimserver?

I assume /opt/wbem/sbin/cimserverd exists and has an entry in /etc/inittab?

Re: INIT: Command is respawning too rapidly.

HP-FMS — Thu, 02 Oct 2008 00:40:17 GMT

the enrty is in /etc/inittab..
but i can not use some commands..
i have restored the server from last ignite.
is ignite is having any problem then i can have one more ignit...please suggest me what will do next

waiting for the reply.....

THANKS
PRASANTH THOMAS

Re: INIT: Command is respawning too rapidly.

HP-FMS — Thu, 02 Oct 2008 00:55:09 GMT

hI ALL

WAITING FOR THE REPLY..............

Re: INIT: Command is respawning too rapidly.

Dennis Handly — Thu, 02 Oct 2008 01:19:31 GMT

>the entry is in /etc/inittab. but I can not use some commands.

If the entry is there but you haven't restored /opt/wbem, then you'll get this message.

Re: INIT: Command is respawning too rapidly.

HP-FMS — Thu, 02 Oct 2008 01:29:51 GMT

Hi
The message is not a problem....
i can not use the commands, one example is given below

if i wanna use the #lvlnboot -v , i ahve to type #/usr/sbin/lvlnboot -v

thanks
Prasanth Thomas

Re: INIT: Command is respawning too rapidly.

Dennis Handly — Thu, 02 Oct 2008 01:52:48 GMT

>I have to type #/usr/sbin/lvlnboot -v

You need to add /usr/sbin to your $PATH. This would normally be there for a root logon.