https://community.hpe.com/t5/operating-system-hp-ux/help-disk-drive-failure-and-pvremove/m-p/2598274#M33756 I was trying to create a new vg on an unused drive, this failed with a block error when the creation of the lvol was attempted and the vg was marked as unused. I have replaced the drive with a new one. I now wish to create the vg on the new drive. When I try to do this pvcreate tells me that there is an entry in lvmtab for this vg already and fails; which I can see as being resonable as it created the vg for the faulty drive but not the lvol. I have tried pvremove and this reports it cant find the device /dev/dsk/cxtxdx. If I do a vg remove I get vg is not activated and i cant activate it. What I want to know is how can I remove the entries for the previous drive from the system in order to create the vg. I really dont want to have to put the old drive back in the system in order to remove its entries, is there a way to do this. I have learned if this were to happen again I should remove the entries before replaceing the drive. Aint hind sight fun!!! Sat, 20 Oct 2001 15:53:51 GMT Neil Harris 2001-10-20T15:53:51Z https://community.hpe.com/t5/operating-system-hp-ux/help-disk-drive-failure-and-pvremove/m-p/2598274#M33756 I was trying to create a new vg on an unused drive, this failed with a block error when the creation of the lvol was attempted and the vg was marked as unused. I have replaced the drive with a new one. I now wish to create the vg on the new drive. When I try to do this pvcreate tells me that there is an entry in lvmtab for this vg already and fails; which I can see as being resonable as it created the vg for the faulty drive but not the lvol. I have tried pvremove and this reports it cant find the device /dev/dsk/cxtxdx. If I do a vg remove I get vg is not activated and i cant activate it. What I want to know is how can I remove the entries for the previous drive from the system in order to create the vg. I really dont want to have to put the old drive back in the system in order to remove its entries, is there a way to do this. I have learned if this were to happen again I should remove the entries before replaceing the drive. Aint hind sight fun!!! Sat, 20 Oct 2001 15:53:51 GMT https://community.hpe.com/t5/operating-system-hp-ux/help-disk-drive-failure-and-pvremove/m-p/2598274#M33756 Neil Harris 2001-10-20T15:53:51Z https://community.hpe.com/t5/operating-system-hp-ux/help-disk-drive-failure-and-pvremove/m-p/2598275#M33757 Neil,<BR /><BR />Do a vgexport on the new vg to get rid of it from lvmtab.<BR /><BR />#vgexport new_vg_name<BR /><BR />Once this is done, you do a pvcreate -f new_disk and then create a vg following the usual procedure.<BR /><BR />-Sri Sat, 20 Oct 2001 16:08:27 GMT https://community.hpe.com/t5/operating-system-hp-ux/help-disk-drive-failure-and-pvremove/m-p/2598275#M33757 Sridhar Bhaskarla 2001-10-20T16:08:27Z