topic The Virtual machines are not automatically starting after the Auto sttribute is enabled in Operating System - HP-UX

The Virtual machines are not automatically starting after the Auto sttribute is enabled

Mahesh Babbar — Fri, 28 Nov 2008 07:01:50 GMT

Hi I have a bl870C installed hpux 11iv2 0712

and have 7 VM over this
the VSE software is T2767AC (A.03.50). and all the guests are now sett to auto booting mode
by hpvmmodify -P -B auto

then rebooted the VM host,but no Virual machines are automatically booting.while booting manually by hpvmstart -P it is booting.

Egalry waiting for a solution.

Re: The Virtual machines are not automatically starting after the Auto sttribute is enabled

Johnson Punniyalingam — Fri, 28 Nov 2008 07:09:29 GMT

Hi,

above output of your command say's -B,

should be (-b) smaller

hpvmmodify -P -b auto

Startup behavior If you omit the option, it is set to auto, and the virtual machine starts when Integrity VM is started. -b start_attribute

Thanks,
Johnson

Re: The Virtual machines are not automatically starting after the Auto sttribute is enabled

likid0 — Fri, 28 Nov 2008 07:17:00 GMT

You can check if you really have enabled it with:

hpvmstatus -V -P yourVM | grep -i "start type"