topic Re: Conserver problem in Operating System - HP-UX

Conserver problem

sen_ux — Sat, 29 Nov 2008 03:51:34 GMT

Hi All,

My Server user conserver console.
Here problem is, after loggin in to console,the whole display is in a single line.
Not getting the normal display.
Server Model-K580
OS- HP-UX 11.11
TERM=vt100

Anyone has Solution.?

Thanks
sen

Re: Conserver problem

Bill Hassell — Sat, 29 Nov 2008 04:07:40 GMT

Can you describe "conserver console"? Is this an HP terminal such as the 700/92, or is it a PC or perhaps a concentrator with multiple terminal connections. Note that TERM=vt100 is meaningless unless it matches the type of terminal you are using.

Re: Conserver problem

sen_ux — Sat, 29 Nov 2008 04:30:42 GMT

Hi,

Yes, there is MUX Interface on one server and runs an application 'conserver'.
We need to login to this server and run 'console ' for connecting to host's console.

This servers is configured for multiple serves and I m facing this problem only on one.

Thanks
sen

Re: Conserver problem

Analyst — Sat, 29 Nov 2008 07:41:41 GMT

Hi sen,

This is profile and environment variable issue.

Check for the variable in other working server and go ahead in this server.

Probably this may solve your issue.

Thanks,
Analyst

Re: Conserver problem

sen_ux — Sat, 29 Nov 2008 07:58:06 GMT

Hi Analyst,

I have verified this with a working server.

Both the server, it is set as 'vt100'

thanks
sen

Re: Conserver problem

Analyst — Sat, 29 Nov 2008 08:30:45 GMT

Hi sen,

What abt the mux port settings, whether all the ports has same settings.

check from mux port configurations,it may be 9600 baud rate, term vt100,52, or DEC .....

check and revert if any errors.

thank,
Analyst.

Re: Conserver problem

sachit patil — Sat, 29 Nov 2008 14:45:48 GMT

hi this console setting.
That needs to be set.
would u ask manufacturer how to go in setting menu.

Re: Conserver problem

sachit patil — Sat, 29 Nov 2008 14:46:19 GMT

also set TERM=hp as u r using console.