topic Re: ignite question in Operating System - HP-UX

ignite question

navin — Mon, 05 Jan 2009 19:21:37 GMT

I have tried taking ignite backup on one of my hp server ..but not sure it is completed successfully .here is the tail message from recovery.log.ANy idea ..is it completed ?

* Preparing to create a system archive.

* Archiving contents of abtmon via tar image to local device/dev/rmt/0mn.
pax: /dev/rmt/0mn : No such device or address
WARNING: The pax command returned a non-zero exit status (exit status 1).
WARNING: The pax command returned a non-zero exit status (exit status 1).
* Creation of system archive complete.

* Cleaning up old configuration file directories

======= 01/05/09 13:15:07 CST make_tape_recovery completed with warnings

Re: ignite question

Patrick Wallek — Mon, 05 Jan 2009 19:32:47 GMT

The key messages are these:

* Archiving contents of abtmon via tar image to local device/dev/rmt/0mn.
pax: /dev/rmt/0mn : No such device or address

The "No such device or address" means that either the tape device /dev/rmt/0mn does not exist on this server or it did not have a tape in the drive.

If you do an 'ioscan -kfnC tape' does anything show up?

Re: ignite question

navin — Mon, 05 Jan 2009 19:35:22 GMT

No ,it did not show up anything.But i have placed a tape and see the progress by green lit .and i have been prompted for changing the second tape.
thanks

Re: ignite question

OldSchool — Mon, 05 Jan 2009 23:34:31 GMT

"'ioscan -kfnC tape' does anything show up?

No ,it did not show up anything........"

if the above is true, I fail to see how you could write to it, as it doesn't exist. I'm mystified at this point.