topic Re: Processor details in Operating System - HP-UX

Processor details

Sunil Rahate_1 — Tue, 13 Jan 2009 09:32:12 GMT

Hi All,

Need details like no. of processor, processor make, no. of cores per CPU for rp3440 HPUX 11i.

Regards

Re: Processor details

Ganesan R — Tue, 13 Jan 2009 09:40:21 GMT

Hi Sunil,

Use #ioscan -fnC processor and
SAM -->Performance Monitor --> System properties

Re: Processor details

Sunil Rahate_1 — Tue, 13 Jan 2009 09:46:23 GMT

How to find the no. of cores per processor.

Regards

Re: Processor details

Venkatesh BL — Tue, 13 Jan 2009 09:47:43 GMT

use 'machinfo' cmd.

Re: Processor details

Jeeshan — Tue, 13 Jan 2009 09:57:20 GMT

check with this command

#echo "selclass qualifier CPU;info;wait;infolog"|cstm

Re: Processor details

Sunil Rahate_1 — Tue, 13 Jan 2009 10:21:50 GMT

machinfo command not available. Also cstm is disabled. any other commands.

Regards

Re: Processor details

Jeeshan — Tue, 13 Jan 2009 10:31:02 GMT

try

#print_manifest|more

Re: Processor details

sujit kumar singh — Tue, 13 Jan 2009 10:56:06 GMT

hi

#machinfo will not run on PARISC machines.

can use

#top
#ioscan -fnCprocessor
#print_manifest
also can take help of cstm

#cstm
cstm>sel all
cstm>info;wait
cstm>infolog

scroll down the pages and towards the later pages u can see the processor details.

to know about the icod CPU and licensing u can use the command
#icod_stat
OR
#icapstatus

Re: Processor details

Torsten. — Tue, 13 Jan 2009 13:57:25 GMT

The cpus in a rp3440 is either pa-8800 or pa8900 - both dual-core.

>> #machinfo will not run on PARISC machines.

Sure?

# machinfo -v
CPU info:
1 PA-RISC 8800 processor (800 MHz, 32 MB)
CPU version 4
2 logical processors (2 per socket)

Vendor identification: Hewlett-Packard
Processor version info: 0x0000000000000284
Processor capabilities: 0x00000000000000b2
FSTWS, FSTWX, FLDWS, FLDWX generate word tx to I/O space
Multimedia halfword shift-and-adds
Multimedia halfword adds and subtracts
Speculative data prefetch on loads of GR0
Instruction cache: 32 MB
Data cache: 32 MB

Memory: 4096 MB (4 GB)

Firmware info:
Firmware revision: 46.34
IPMI is supported on this system.
BMC firmware revision: 3.52

Platform info:
Model: "9000/800/rp3440 "
...

Re: Processor details

sujit kumar singh — Tue, 13 Jan 2009 14:05:18 GMT

thanks Torsten,

for the correction.

Regards
Sujit

Re: Processor details

Torsten. — Tue, 13 Jan 2009 14:08:48 GMT

You are welcome, "machinfo" runs on both, PA-RISC and Integrity with 11.31.