topic Re: truss command in HP-UX 11i in Operating System - HP-UX

truss command in HP-UX 11i

ng_7 — Thu, 05 Feb 2009 02:04:30 GMT

Dear Experts

Can please tell me the following solaris command in HP-UX 11i ?

truss -aef -w all -r all -o /tmp/truss.out -p 100

thanks

regards
ng

Re: truss command in HP-UX 11i

Shinji Teragaito_1 — Thu, 05 Feb 2009 02:41:29 GMT

You need to install tusc from

http://hpux.connect.org.uk/hppd/hpux/Sysadmin/tusc-7.9/

All of the parameters you mentioned are the same.

% tusc -aef -w all -r all -o /tmp/tusc.out -p 100

Re: truss command in HP-UX 11i

ng_7 — Thu, 05 Feb 2009 03:58:38 GMT

hi, not able to go to the link, would you mind to upload to this forum for me. thanks

Re: truss command in HP-UX 11i

Venkatesh BL — Thu, 05 Feb 2009 04:04:56 GMT

Try this: http://h20331.www2.hp.com/hpsub/cache/286022-0-0-225-121.html

The ftp link is: ftp://ftp.hp.com/pub/catia/Utils/tusc7.4.shar

Re: truss command in HP-UX 11i

rick jones — Fri, 06 Feb 2009 00:23:18 GMT

If all those URLs fail, you can try:

ftp://ftp.cup.hp.com/dist/networking/tools/

Re: truss command in HP-UX 11i

ng_7 — Fri, 06 Feb 2009 00:45:26 GMT

have try to download from ftp://ftp.hp.com/pub/catia/Utils/tusc7.4.shar

and rename tusc7_4_shar.mht to tusc7_4.shar

and I try install and get error as below.

sh tusc7_4.shar
tusc7_4.shar[19]: Syntax error at line 19 : `&' is not expected.

please help to see the uploaded file

thanks

Re: truss command in HP-UX 11i

rick jones — Fri, 06 Feb 2009 00:56:22 GMT

That URL downloaded and unshared for me just fine. I suspect something is wrong in the download - for example, what gave it that odd addition to the filename... make certain the download is in binary mode not ascii or some other mode.

Re: truss command in HP-UX 11i

Tom Henning — Fri, 06 Feb 2009 11:53:19 GMT

Looks like when it was downloaded it was translated into HMTL, for example the greater than symbols ('>') were changed into the phrase '>'. Try the download again using a different browser, or at least do not save as html.

Re: truss command in HP-UX 11i

ng_7 — Wed, 11 Feb 2009 05:00:53 GMT

hi, have install the file, and I can see the file being extracted to /home/tmp as shown below. but I still got error
/home/tmp/tusc -aef -w all -r all -o /tmp/truss.out -p 7956
sh: tusc: not found.

what is the problem. the number afer -p is it process id ?

thanks

app:/home/tmp# sh tusc7_4.shar
x - tusc [compressed]
linking - truss
x - tusc.1 [compressed]
x - sstep [compressed]

app:/home/tmp#

-r-xr-xr-x 1 root sys 4900 Oct 13 2002 sstep
lrwxrwxrwx 1 root sys 4 Feb 11 11:45 truss -> tusc

-rwxr-xr-x 1 root sys 987136 Oct 13 2002 tusc
-rw-r--r-- 1 root sys 22518 Oct 13 2002 tusc.1
-rw-r----- 1 root sys 998231 Feb6 tusc7_4.old
-rw-rw-rw 1 root sys 847913 Feb 11 tusc7_4.shar
drwxrwxrwx 4 root sys 1024 Jul 31 2008 zip

Re: truss command in HP-UX 11i

Dennis Handly — Wed, 11 Feb 2009 10:56:23 GMT

>sh: tusc: not found.

(I'm not sure why that isn't an absolute path?)
What does "file /home/tmp/tusc" show?

>the number after -p is it process id?

There is no relation between -p (print PIDs) and what follows. But it is probably the PID.
See the man page.

Re: truss command in HP-UX 11i

ng_7 — Fri, 13 Feb 2009 01:13:04 GMT

./tusc: PA-RISC1.1 shared executable dynamically linked -not stripped

Re: truss command in HP-UX 11i

Dennis Handly — Fri, 13 Feb 2009 04:16:06 GMT

>./tusc: PA-RISC1.1

This shows it is a binary.
What is PID 7956?
ps -fp 7956

tusc -aef -w all -r all -o /tmp/truss.out -p 7956

Please move the -p with the options: -aefp

What does /home/tmp/tusc do? It should give help.

Re: truss command in HP-UX 11i

ng_7 — Mon, 16 Feb 2009 00:54:35 GMT

>./tusc: PA-RISC1.1

This shows it is a binary.
What is PID 7956?
ps -fp 7956

I am using PID 8076 as a sample now
PID 8076 is :
/opt/java1.3/bin/../bin/PA_RISC2.0/native_threads/java -Dengine

there is no help file found
app:/home/tmp# man tusc
No manual entry for tusc.

and same problem with the below command :
app:/home/tmp# tusc -aef -w all -r all -o /tmp/truss.out -aefp 8076
sh: tusc: not found.
app:/home/tmp#

Re: truss command in HP-UX 11i

Dennis Handly — Mon, 16 Feb 2009 07:39:51 GMT

>there is no help file found

You need to put tusc.1 in the proper place, probably /usr/share/man/man1/.
Or you can format it directly with:
nroff -man tusc.1 | col -x | more -s

>same problem with the below command:
tusc -aef -w all -r all -o /tmp/truss.out -aefp 8076

Replace -aef at the beginning with -aefp and remove -aefp at the end. Also remove -w and -r, just to see what you get:
/home/tmp/tusc -aefp -o /tmp/tusc.out 8076

Also what happens if you invoke with no options: /home/tmp/tusc

Re: truss command in HP-UX 11i

Abid Iqbal — Thu, 30 Apr 2009 12:38:15 GMT

Hi ng
Here is a link you can download tusc 7.9
http://hpux.connect.org.uk/hppd/hpux/Sysadmin/tusc-7.9/
1. Place this zip file in "/tmp/ng" folder
2. unzip the file "#gunzip filename"
3. it will unzip and place a .depot file on the same location.
4. #swinstall -s file.depot
5. Complete the installation process.
5. Find the path of tusc by "whereis tusc"
6. Change "#cd /usr/local/bin" and run the command using the same sysntax of command.